Table of Contents
Advertisement
Useful Tips (continued)
LINK function
• Using the LINK function, you can turn on and off the power to the JX-S333 by detecting the
incoming S-video signals. Therefore, it is not required to turn on the power to the JX-S333
manually.
How to set the function
1 Press one of the SOURCE SELECT buttons for which you
can set this function.
2 Press LINK to activate the LINK function for the selected
playback component.
The LINK indicator lights in red.
To cancel the function, press LINK again.
The LINK indicator goes off.
How the function actually works
When the JX-S333 detects incoming signal through the
playback source for which the LINK function is activated,
the power comes on automatically.
When incoming signal stops, the power goes off.
Notes:
• To use the LINK function, the playback components
should be connected to the JX-S333 using the S-
VIDEO connectors. If connected using the component
video connectors, this does not function.
• If you do not use the LINK function, deactivate the
function by pressing LINK (the indicator goes off), then
turn on the power to the JX-S333.
To activate the function, press LINK again.
• While the DUBBING LOCK function is in use, the LINK
button does not work.
To cancel the LINK function, first cancel the DUBBING
LOCK function.
20
-EN
When S-video signals
are emitted...
JX-S333 automatically turns on by detecting the in-
coming S-video signals.
(When the signals stop, the power also turns off.)
DVD Player
JX-S333
(MONITOR SELECT)
(MONITOR SELECT)
Advertisement
Table of Contents
