JVC JX-S333-J Instructions Manual page 15

• Turn on the power to the JX-S333.
• Turn on the TV monitor and select the input connected to the MONITOR OUT connectors on the JX-S333.
Preparation
• Turn on the power to all other connected components.
POWER
SOURCE
SELECT
1 1
Selecting VCR 1
2
3
4
5
Selecting DBS tuner
DUBBING LOCK
LINK
(MONITOR SELECT)
4
Set the dubbing lock mode
1
To exit from dubbing lock mode:
• Press DUBBING LOCK again.
• When the input source is changed by pressing one of the
SOURCE SELECT buttons in the dubbing lock mode, the video
displayed on the TV monitor connected to the MONITOR OUT
connectors can be changed without affecting the video being
dubbed.
Note:
While the DUBBING LOCK function is activated, the power cannot be turned off and the LINK button does not work.
(MONITOR SELECT)
5 4
1
Press SOURCE SELECT "1" to select
.
VCR1 as the source component.
• The indicator lights in red.
1
• If the SOURCE SELECT "1" indicator on
the JX-S333 is already lit, it is not required
to press the SOURCE SELECT "1" button.
2
Start playback of VCR1.
.
• The VCR1 playback video is displayed on the TV
monitor screen.
PLAY
3
Start recording of VCR2.
.
4
Press DUBBING LOCK to set the
.
dubbing lock mode.
• The indicator lights in red.
DUBBING LOCK
( MONITOR SELECT )
5
Press SOURCE SELECT "4" to
.
watch the video of the DBS.
• The SOURCE SELECT "4" indicator lights in red.
• The DBS video is displayed on the TV monitor
screen.
4
PLAYPlayback video
REC
DBS video
EN-
15