Advertisement
Available languages
Available languages
Manual do Usuário - EchoLife
ET325 IP Phone
Campo
Descrição
Syslog Level
Select the ET325 to report the log level. The default
value is NONE and it indicates that no log information is
sent.
The level is one of DEBUG, INFO, WARNING, or
ERROR. Syslog messages are sent based on the
following events:
Product model/version on boot up (INFO
level)
NAT related info (INFO level)
Sent or received SIP message (DEBUG
level)
SIP message summary (INFO level)
Inbound and outbound calls (INFO level)
Registration status change (INFO level)
Negotiated codec (INFO level)
Ethernet link up (INFO level)
SLIC
ERROR levels)
Memory exception (ERROR level)
The Syslog uses the USER facility. In addition to
standard Syslog payload, it contains the following
component:
HW_LOG: [device MAC address][error code] error
message
For example: May 19 02:40:38 192.168.1.14 HW_LOG:
[00:0b:82:00:a1:be][000] Ethernet link is up.
NTP Server
URI or IP address of the NTP server, which will be used
by the phone to synchronize the date and time.
Allow DHCP
If enabled, the DHCP server can override the NTP server
Option 42 to
configured in the phone. This is for ITSP or system
Override NTP
administrator. End user should ignore this.
Server
4 Guia de Configuração
chip
exception
(WARNING
44
and
Advertisement
