Advertisement
16. Save the data by using the
been completed.
The Cursor will move to the center and blink two times before it automatically moves
back to its original position.
After completing and saving the R, G and B Convergence Adjustment , the data
should be saved by pressing the
17. After completing the Convergence Adjustment, exit Convergence Mode by using the
18. Follow the same procedure for DTV (1080i) Convergence Adjustment as you did for Normal Mode
Convergence Adjustment.
If Convergence Adjustment is not properly done, or the Convergence Center escaped the
sensor's detection area, an adjustment error occurs. Therefore, the Jig Screen should be
used for precise Convergence Adjustment during servicing.
Samsung Electronics
key after the Red and Blue Color Convergence adjustment has
button before exiting Convergence Mode.
Alignment and Adjustment
key.
2-29
Advertisement
