Names And Functions; Overall View - JVC AV-P960E Instructions Manual

Names and Functions

Overall View

Camera Head
For capturing images of objects on the stage or surround-
ing areas.
Camera Arm
Supporting arm for the camera head. Adjust its angle when
shooting 3-dimensional objects.
Arm Lock
For adjusting the length of camera. Release the lock when
retracting or extending the camera arm and lock it at the
adjusted position.
Side Illuminations
Adjust to ensure that the stage is evenly lighted.
Handle
Pull out this handle to carry the unit. Put the handle away
when not in use.
Back Illumination
Use this lighting when viewing transparent materials such
as films.
☞ Page 15 'Presenting Films and Other Transparent Ma-
terials'
Rear Panel ☞ Page 7
Control Panel ☞ Page 6
Stage
For placing objects (or materials).
Up to A3 landscape equivalent (376 mm x 282 mm) can
be captured.
Remote Sensor
For receiving signals from the remote control unit.
☞ Page 23 'Operating the Remote Control Unit'
SD Slot
Slot for inserting the SD card.
☞ Page 20 'Storing Images in SD Card'
Slide Film Holder
Use this when viewing slide films.
☞ Page 14 'Presenting Slide Films'
Close-up Lens
Remove this lens when shooting surrounding objects.
☞ Page 13 'Shooting Surrounding Objects'
Power Switch
To turn on/off the power.
Right Side
E-5