Before Use; Part Names; Setup - JVC AV-P950U Instructions Manual

BEFORE USE

Part names

Side illumination
Lock release button
(UNLOCK)
POWER switch
Back illumination

Setup

1.
While pressing the UNLOCK button
arm so that it stands in the direction shown
2.
When the camera arm is raised all the way, release the
UNLOCK button.
3.
When the UNLOCK button returns to its original position
and the camera arm is locked, release the camera arm.
4.
Turn the camera head in the direction shown
is heard. The camera head should now be facing the stage.
5.
Move the side illumination arms in the directions shown,
4 5
first and then .
CAUTION
• When using the UNLOCK button, do not release the
camera arm until it is locked. Do not apply exces-
sive force on the side illuminations (arms and lights),
otherwise, a malfunction or injury may result.
4
Camera arm
1
, raise the camera
2
.
3
until a click
Remote control light reception section
Camera head
Slide film holder
Close-up lens
Rear panel
Stage
1
4
Side illumination
Control panel
2
3
5