HYDRAULIC COMPRESSION TOOL: operator and surroundings. 3. KEEP FINGERS AND OTHER BODY PARTS AWAY H-CK 240 FROM COMPRESSION DIES & MOVING PARTS. Dimensions: 480 mm L Pinch point hazard. Compression Dies at high force can cause severe personal injury.
OPERATING INSTRUCTIONS COMPRESSION OPERATION WARNING 1. Retract the Ram fully by pressing the release (2.1). Pinch point hazard. Compression Dies at high 2. Open the tool head by lifting the Latch (Figure 1). force can cause severe personal injury. Keep all body parts away from moving parts of the 3.
TROUBLESHOOTING Problem Cause Solution Remove body handle and check on Insuf cient hydraulic oil. reservoir for proper or level. The oil should be at the top of the reservoir when the cap is removed. Ram should be fully retracted The ram will not advance. before removing cap.