DREAMS SLEEPMOTION 200i Assembly Instructions Manual
Kobe lifestyle tv bed
Hide thumbs
Also See for SLEEPMOTION 200i:
- Owner's manual (14 pages) ,
- Manual (16 pages) ,
- Owner's manual (18 pages)
Related Manuals for DREAMS SLEEPMOTION 200i
Summary of Contents for DREAMS SLEEPMOTION 200i
- Page 1 KOBE LIFESTYLE TV BED SLEEPMOTION 200i 1.5 hour approx Two person assembly time assembly MK1 220601...
-
Page 2: Assembly Tips
Thank you Hello, thanks for choosing to purchase your bed from Dreams - you're now on your way to your best ever night's sleep. Before you begin building your bed, please take a moment to read through the instructions and make sure that you've got all the relevant parts listed on the following pages. -
Page 3: Parts List
Parts The bed you have purchased comes with a Sleepmotion 200i Lifestyle electric bed base. Complete the assembly of the Sleepmotion base before assembly of the bed frame. Assembly Instructions are included within the Sleepmotion base carton. Once the base is assembled in the final location, follow the steps below to build your bed frame around it. -
Page 4: Tools Required
- 6‘’ (15cm), see Step 2. Connect the power and check the operation then step by step follow the bed assembly instructions below, to build the bedstead around the sleepmotion 200i bed base. Kobe Sleepmotion Lifestyle TV Bed - Assembly guide - Page 4... - Page 5 At time of purchase you would have chosen Non-Audio or Audio version of this TV Bed. This guide shows both versions and assembly steps are the same. Prepare the headboard and footboard for assembly of the bed. 10mm NON-AUDIO AUDIO Kobe Sleepmotion Lifestyle TV Bed - Assembly guide - Page 5...
- Page 6 Assemble the bed frame around the bed base. First, screw in the eight 6" (15cm) legs as shown. Position the electric bed base. Place the headboard in the location in which it shall be used and attach the right hand side rail to it. Make sure the e le ctric be d base is corre ct way round with mattress stopper at the foot end.
- Page 7 Connect power to the electric bed base. Connect Power Lead for electric base to your wall socket - for safety this must be an earthed power supply. Raise the head and foot ends of the bed base using the remote control. Position footboard and connect side rail brackets.
- Page 8 Connect mains power sup ply, it is exactl y same for Audio or Non-Audio. Connect Main Power Lead (O) to your wall socket - for safety this must be an earthed power supply. AUDIO Raise the TV lift. NON-AUDIO Press the “UP” button to raise the TV lift. Kobe Sleepmotion Lifestyle TV Bed - Assembly guide - Page 8...
- Page 9 Note: For illustration purposes only, TV connections may vary. Tip: Before fitting the TV, push any leads through each duct from the top choosing the best side to use depending on where the connection ports are on back of the TV. Never cross leads from one side to the other unless as shown in the instruction, in this Step.
- Page 10 Height of TV is normally pre-set - follow this guide if it needs to be changed. Max TV Height 573mm Loosen the two bolts. Measure the height of the TV, Adjust the lid lifter column adding 5mm to height of TV. Re-tighten the two bolts.
- Page 11 IF HARDWARE IS SUPPLIED WITH THE TV, PLEASE USE IT IN PREFERENCE Fitting the television. When spacers are provided it is very important that these are fitted in the Check the hardware supplied with TV and if Vesa correct place, fit between TV & TV bolts and spacers are supplied please use these to fit bracket, as in this sketch.
- Page 12 Note: For illustration purposes only, TV connections may vary. TV power lead supplied with the TV cover from cable clips & adhere to back of TV. PLUG IN - KEEP ALL CABLES TIGHT - USE CLIPS & TIES PROVIDED. Optical connection is for Audio version only. OPTICAL REMOVE DUST-CAP SOCKET...
- Page 13 Connecting and safely positioning the cables. Bring the set of cables out under the headboard making sure they are inside the legs and are not trapped in any way. This power socket for the TV plug is not continuously live so only use to connect the power lead supplied with the TV.
- Page 14 Make sure everything is working properly then fit the left hand side rail. Make certain the bed is squared up as shown in the diagram then tighten all bed assembly bolts 100%. 100% Kobe Sleepmotion Lifestyle TV Bed - Assembly guide - Page 14...
- Page 15 Fit the remote control holster to left or right. RC for TV Flatten the bed and check the gaps are as per the sketch below Kobe Sleepmotion Lifestyle TV Bed - Assembly guide - Page 15...
- Page 16 If the AUDIO version was selected, please follow this guide AUDIO OPERATION GUIDE Parts list item code for the Audio footboard is (BA). MODE Parts list item code for the 2.1 remote control is (TA). VOL. BASS TREB. TURN AMPLIFIER ON or OFF. KOBE 2.1 STEREO SYSTEM 1) Turn on the mains power to the TV Bed.
-
Page 17: Care And Maintenance
Technical Specifications Max TV Size: 975 x 575 x 85 (WHDmm) Overall Dimensions (LWH mm) Double: 2280 x 1605 x 1160 King: 2380 x 1755 x 1160 Internal Dimensions (LW mm) Double: 1930 x 1385 King: 2030 x 1535 Floor to top of base Top of base to top of side rail... - Page 18 TV BED SAFETY INFORMATION GENERAL INFORMATION It is very important not to place any vessel containing liquids, e.g. drinks or vase of flowers, on top of the TV footboard which may accidentally spill and enter the TV compartment as this could cause damage to the TV and/or the TV lifting equipment. If this happens, please contact Customer Services - ring 0800 652 6750.
- Page 19 Little dreamers Keep the little ones entertained while you assemble your new purchase.
Need help?
Do you have a question about the SLEEPMOTION 200i and is the answer not in the manual?
Questions and answers