Table of Contents
Advertisement
How to Recharge the Portable ROM Player
The portable ROM Player operates on a battery pack which contains rechargeable Lithium ion batteries.
Batteries should be recharged for more than three hours before use.
How to Recharge the Portable ROM Player
1
Connect the power cord.
Charger
(XA-GC20BK)
1
• There is no power
switch on the
Charger.
• Place on a level and
flat surface.
2
Insert the Portable ROM Player. The display window should be facing towards
you.
Portable ROM
Player
(XA-GP1BK)
2
Plug the power cord plug into a
standard household power outlet.
Connect the power cord to the
AC IN jack.
Recharge
indicator
Power cord (included with the
Charger)
Only use the indicated power cord.
When power cord is plugged in, the heat
ventilation fan begins to operate.
• A maximum of 20 units can be recharged at one
time.
The Portable ROM Player should be recharged with
the POWER turned OFF. The amount of time
necessary to recharge the batteries becomes
slightly longer when the POWER is left ON.
• About 3 hours is required to fully recharge the
batteries.
Even when the Portable ROM Player is left in the
recharger, it is not possible for the batteries to
become over charged.
• Recharge indicator
The battery level is indicated by the color of the
light.
Red
Green : The batteries are more
Note
• Take precautions to install the Charger more than
10 cm from a wall or other objects. This assures
that the unit can be adequately cooled during
operation.
AC110-240V
50/60Hz
(Power outlet
that is always
supplied with
a continuous
current.)
: Less than 60% of
recharging has taken
place.
than 60% recharged.
Even when the batteries
become completely
recharged, the indicator
light stays on.
7
Advertisement
Table of Contents
