Table of Contents
Advertisement
Using the earphone
1
Insert the earphone (sold separately)
mini plug into the earphone jack
located on the Portable ROM Player.
Portable ROM Player
3.5 mini jack
2
Clamp the earphone over the ear.
Earphone (sold separately)
3
Adjust the volume to a comfortable
level.
• Sound is still produced even
if the VOLUME dial is set to
"MIN" minimum.
VOLUME dial
How to turn on the power
• Initialization
When the power is turned on, the following screens
appear in the display window:
software version
display
• When a CF card has not been
inserted, the screen display stops
here.
remaining battery
power display
CF card version display
• When turned on within an Auto
reception area, playback begins
without displaying the CF card
version.
stand-by display
• At this point, the unit is in stand by.
* The remaining battery power display will differ according
to the power remaining in the rechargeable batteries.
Displayed when the battery power is
approximately more than 75% :
Displayed when the battery power is
approximately between 50 - 75% :
Displayed when the battery power is
approximately between 30 - 50% :
Displayed when the battery power is
approximately below 30% :
• Set the POWER
switch to ON.
The initialization
screen appears in
the display
window. After
about 5 seconds,
the unit enters
stand by.
Example:
Displayed when
version 1.2 is
installed
Example:
Displayed when the
battery power is
approximately more
than 75%.
Example:
17
Advertisement
Table of Contents
