Firmware Update Procedure - Denon RCD-N10 Service Manual

FIRMWARE UPDATE PROCEDURE

1. Items necessary for update
Items necessary for update are as follows.
Update Type Needed Part for Update
USB flash drive (USB 2.0 : Min 1GB)
Via USB • We recommend a USB memory device
that has an LED installed.
Internet Connection by Broadband Circuit
Modem
Via OTA
Router
Ethernet cable
(CAT-5 or greater is recommended)
Table 1
Update download file when the MAIN PCB or network module is replaced
Model Name Model Area
RCD-N10 ALL
Table 2
Update download file when the firmware is updated (Two files, "HW component" and "LEGO component")
Model Name Model Area
RCD-N10E3 North America (E3)
RCD-N10E2 Europe (E2)
RCD-N10E1C China (E1C)
RCD-N10JP Japan (JP)
Requirement
Formatting FAT16 or FAT 32
-
-
-
-
Download from SDI
avr_40.prod.update.factory.xxxx.zip
For HW component
Product ID : 000200200100
Product ID : 000200200200
Product ID : 000200200500
Product ID : 000200200400
Standard Service Equipment
Purchase from D&M Article code
Not offered by D&M
X
X
X
X
X
Download from SDI
DPMS_RCDN10ALL_LEGO_xxx.zip
72
Offered / not Offered
Download from SDI
- "Table 1" or "Table
-
-
-
-
For LEGO component
heos_40.prod_x.xxx.xx.zip
2"
-
-
-
-