Abit AN52 User Manual
  1. Manuals
  2. Brands
  3. Abit Manuals
  4. Motherboard
  5. AN52
  6. User manual

Abit AN52 User Manual

Motherboard amd socket am2
Hide thumbs Also See for AN52:
Table of Contents

Advertisement

Quick Links

Download this manual
AN52
AN52-E
Motherboard
AMD Socket AM2
User's Manual
About this Manual:
This user's manual contains all the information you may
need for setting up this motherboard. To read the user's
manual of PDF format (readable by
the "Driver & Utility CD" into the CD-ROM drive in your
system. The auto-run screen will appear, click the
"Manual" tab to enter its submenu. If not, browse the
root directory of the CD-ROM via the File Manager, and
double click the "AUTORUN" file.
Adobe
Reader), place
NVIDIA NF520 Single Chip
2GHz HT
Dual Channel DDR2 800
Gigabit LAN (AN52)
10/100 LAN (AN52-E)
SATA 3Gb/s RAID
USB 2.0
7.1-Channel HD Audio (AN52)
5.1-Channel HD Audio (AN52-E)
abit SoftMenu™ Technology
Vista HW Ready

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AN52 and is the answer not in the manual?

Questions and answers

Related Manuals for Abit AN52

Summary of Contents for Abit AN52

  • Page 1 10/100 LAN (AN52-E) SATA 3Gb/s RAID USB 2.0 About this Manual: 7.1-Channel HD Audio (AN52) This user’s manual contains all the information you may 5.1-Channel HD Audio (AN52-E) need for setting up this motherboard. To read the user’s manual of PDF format (readable by...
  • Page 2 AN52/AN52-E User’s Manual English + Multilingual QIG P/N: 4310-0000-79 Rev. 1.00, March 2007 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual.

  • Page 3: Table Of Contents

    Contents 1. Hardware Setup ............... 1-1 1.1 Specifications................1-1 1.2 Motherboard Layout ..............1-2 1.2.1 AN52 .................. 1-2 1.2.2 AN52-E ................1-3 1.3 Choosing a Computer Chassis ............1-4 1.4 Installing Motherboard ..............1-4 1.5 Checking Jumper Settings............. 1-5 1.5.1 CMOS Memory Clearing Header and Backup Battery ....1-5 1.6 Connecting Chassis Components ...........
  • Page 4 4.17 Bahasa Malaysia//Panduan Pemasangan Ringkas ....... 4-17 4.18 ไทย//คู ่ ม ื อ การติ ด ตั ้ ง อย่ า งย่ อ ............4-18 4.19 繁體中文................. 4-19 4.19.1 規格 ................4-19 4.19.2 快速安裝略說..............4-20 4.20 简体中文................. 4-21 4.20.1 规格 ................4-21 AN52/AN52-E...
  • Page 5 4.20.2 快速安装略说..............4-22 5. Appendix ................5-1 5.1 Troubleshooting (How to Get Technical Support?)......5-1 5.1.1 Q & A ................. 5-1 5.1.2 Technical Support Form............5-4 5.1.3 Contact Information............. 5-5 AN52/AN52-E...
  • Page 6 AN52/AN52-E...

  • Page 7: Hardware Setup

    • 1x PS/2 Keyboard connector • Supports Dual Channel DDR2 800 • 1x PS/2 Mouse connector Un-buffered ECC/Non-ECC memory • 1x 7.1-Channel Audio connector (For AN52 only) (For AN52 only) • Onboard Gigabit LAN • 1x 5.1-Channel Audio connector (For AN52-E only) (For AN52-E only) •...

  • Page 8: Motherboard Layout

    1.2 Motherboard Layout 1.2.1 AN52 AN52/AN52-E...

  • Page 9: An52-E

    1.2.2 AN52-E The motherboard and its component layouts illustrated in the following chapter ※ of this manual were mainly based on model “AN52”, unless specifically stated. AN52/AN52-E...

  • Page 10: Choosing A Computer Chassis

    Install the motherboard with screws and have them tightened. To prevent shorting the PCB circuit, ※ please REMOVE the metal studs or spacers if they are already fastened on the chassis base and are without mounting-holes on the motherboard to align with. AN52/AN52-E...

  • Page 11: Checking Jumper Settings

    For incorrect CPU ratio/clock settings in the BIOS, press <Del> key to enter the BIOS setup menu right after powering on system. Set the CPU operating speed back to its default or an appropriate value. Save and exit the BIOS setup menu. AN52/AN52-E...
  • Page 12 Enter the BIOS setup menu. Reconfigure the setup parameters if necessary. CAUTION: Danger of explosion may arise if the battery is incorrectly renewed. ※ Renew only with the same or equivalent type recommended by the battery ※ manufacturer. Dispose of used batteries according to the battery manufacturer’s instructions. ※ AN52/AN52-E...

  • Page 13: Connecting Chassis Components

    A minimum power of 300W or higher is recommended. ATX12V1: ATX 12V 8-Pin Power Connector This connector supplies power to CPU. The system will not start without connecting power to this one. AN52/AN52-E...

  • Page 14: Front Panel Switches & Indicators Headers

    Connects to the Suspend LED cable (if there is one) of chassis front panel. • PWR (Pin 6, 8): Connects to the Power Switch cable of chassis front panel. • PLED (Pin 16, 18, 20): Connects to the Power LED cable of chassis front panel. AN52/AN52-E...

  • Page 15: Fan Power Connectors

    These connectors each provide power to the cooling fans installed in your system. • CPUFAN1: CPU Fan Power Connector • SYSFAN1: System Fan Power Connector • AUXFAN1~2: Auxiliary Fan Power Connectors These fan connectors are not jumpers. DO NOT place jumper caps on these ※ connectors. AN52/AN52-E...

  • Page 16: Installing Hardware

    CPU. The lever clicks when it’s locked into position. 3. The heatsink for CPU may have thermal interface material attached bottom. If not, applying a few squeeze of thermal paste to the CPU die will help to increase the contact. 1-10 AN52/AN52-E...
  • Page 17 ※ A higher fan speed will be helpful for better airflow and heat-dissipation. Nevertheless, stay alert to not touch any heatsink since a high temperature generated by the working system is still possible. AN52/AN52-E 1-11...

  • Page 18: Ddr2 Memory Slots

    DIMM module. Static electricity can damage the electronic components of the computer or ※ optional boards. Before starting these procedures, ensure that you are discharged of static electricity by touching a grounded metal object briefly. 1-12 AN52/AN52-E...

  • Page 19: Connecting Peripheral Devices

    Make sure to configure the “Master” and “Slave” relation before connecting ※ two drives by one single ribbon cable. The red line on the ribbon cable must be aligned with pin-1 on both the IDE port and the hard-drive connector. AN52/AN52-E 1-13...

  • Page 20: Serial Ata Connectors

    Each header supports 2x additional USB 2.0 ports by connecting bracket or cable to the rear I/O panel or the front-mounted USB ports of your chassis. Pin Assignment Pin Assignment Data0 - Data1 - Data0 + Data1 + Ground Ground Make sure the connecting cable bears the same pin assignment. ※ 1-14 AN52/AN52-E...

  • Page 21: Internal Audio Connectors

    Pin 4 “AVCC” of this header. Pin Assignment Pin Assignment (HD AUDIO) (AC’97 AUDIO) MIC2 L MIC In AGND MIC2 R MIC Power AVCC FRO-R Line Out (R) MIC2_JD F_IO_SEN FRO-L Line Out (L) LINE2_JD AN52/AN52-E 1-15...
  • Page 22 Right-click the “Realtek HD Audio Manager” icon system tray. Click “Audio I/O” tab, and then click “Connector Settings”. (This screen shot was taken from model “AN52”.) Click “Disabled front panel jack detection”, and then click “OK” to confirm. 1-16 AN52/AN52-E...

  • Page 23: Pci And Pci Express X16, X1 Slots

    Install PCI cards into slots “PCI1”, “PCI2”, and/or “PCI3”. 1.9 Onboard Indicators 1.9.1 Power Source Indicators • 5VSB: This LED lights up when the power supply is connected with power source. • VCC: This LED lights up when the system power is on. AN52/AN52-E 1-17...

  • Page 24: Connecting Rear Panel I/O Devices

    • Mouse: Connects to PS/2 mouse. • Keyboard: Connects to PS/2 keyboard. (For model AN52) • AUDIO1: Cen./Sub. (Center / Subwoofer): Connects to the center and subwoofer channel. R.L./R.R. (Rear Left / Rear Right): Connects to the rear left and rear right channel.

  • Page 25: Bios Setup

    In order to increase system stability and performance, our engineering staff is ※ constantly improving the BIOS menu. The BIOS setup screens and descriptions illustrated in this manual are for your reference only, and may not completely match with what you see on your screen. AN52/AN52-E...

  • Page 26: Softmenu Setup

    This item selects the external clock frequency. Due to the specification limit of the CPU you installed, the speed you set over its standard bus speed is supported, but not guaranteed. Multiplier Factor This item displays the multiplier factor for the CPU you installed. AN52/AN52-E...
  • Page 27 The option “User Define” enables you to select the following voltages manually. CPU Core Voltage DDR2 Voltage Hyper Transport Voltage NB Voltage DDR2 Reference Voltage AN52/AN52-E...

  • Page 28: Standard Cmos Features

    IDE HDD Auto-Detection Press Enter Item Help IDE Channel 1 Master Auto Access Mode Auto Capacity 0 MB Cylinder Head Precomp Landing Zone Sector :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults AN52/AN52-E...
  • Page 29 This item determines whether the system stops if an error is detected during system boot-up. [All Errors]: The system-boot will stop whenever the BIOS detect a non-fatal error. [No Errors]: The system-boot will not stop for any error detected. AN52/AN52-E...
  • Page 30 640K for systems with 640K or more memory size installed on the motherboard. Extended Memory This item displays the amount of extended memory detected during system boot-up. Total Memory This item displays the total memory available in the system. AN52/AN52-E...

  • Page 31: Advanced Bios Features

    [Off]: The numeric keypad functions as arrow keys. Security Option This item determines when the system will prompt for password - every time the system boots or only when enters the BIOS setup. [Setup]: The password is required only when accessing the BIOS Setup. AN52/AN52-E...
  • Page 32 This item allows the BIOS to support some old or special IDE devices by prolonging this delay time. A larger value will give more delay time to the device for which to initialize and to prepare for activation. Full Screen LOGO Show This item determines to show the full screen logo when booting. AN52/AN52-E...

  • Page 33: Advanced Chipset Features

    You may manually set the DRAM timing parameters through its sub-items, or leave them at their default settings according to the SPD (Serial Presence Detect) data stored in the DRAM. SSE/SSE2 Instructions This item allows you to Enable or Disable the SSE/SSE2 (Streaming SIMD Extensions) instruction set. AN52/AN52-E...

  • Page 34: Integrated Peripherals

    Phoenix – AwardBIOS CMOS Setup Utility OnChip IDE/SATA Device ► IDE/SATA Function Setup Press Enter Item Help ► RAID Configuration Press Enter :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults 2-10 AN52/AN52-E...
  • Page 35 Item Help x - SATA1 RAID Disabled x - SATA2 RAID Disabled x - SATA3 RAID Disabled x - SATA4 RAID Disabled :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults AN52/AN52-E 2-11...
  • Page 36 Onboard LAN Controller This option enables or disables the LAN controller. Onboard LAN Boot ROM This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and access the local area network directly. 2-12 AN52/AN52-E...

  • Page 37: Power Management Setup

    When set to [Enabled], access through the onchip LAN port can remotely wake up the system that was in Soft-Off condition. Wake Up by Alarm When set to [Enabled], you can set the date and time you would like the Soft-Off PC to AN52/AN52-E 2-13...
  • Page 38 Restore On AC Power Loss This item selects the system action after an AC power failure. [Power Off]: When power returns after an AC power failure, the system’s power remains off. You must press the Power button to power-on the system. 2-14 AN52/AN52-E...
  • Page 39 If the system’s power is off when AC power failure occurs, it will remain off when power returns. If the system’s power is on when AC power failure occurs, the system will power-on when power returns. HPET Support Options: [Disabled], [Enabled]. AN52/AN52-E 2-15...

  • Page 40: Pnp/Pci Configurations

    This item determines whether the MPEG ISA/VESA VGA cards can work with PCI/VGA or not. [Enabled]: MPEG ISA/VESA VGA cards work with PCI/VGA. [Disabled]: MPEG ISA/VESA VGA cards do not work with PCI/VGA. Maximum Payload Size This item sets the maximum TLP payload size for the PCI Express devices. 2-16 AN52/AN52-E...

  • Page 41: Pc Health Status

    CPU FANEQ Control This item allows you to control the CPU fan speed. When set to [Enabled], the following items become selectable. CPU FanEQ Target Temp. This item sets the temperature mark for the “CPU FanEQ” function to take effect. AN52/AN52-E 2-17...
  • Page 42 “SYS FanEQ Target Temp.” plus the value of item “SYS FanEQ Temp. Tolerance”, the speed ratio for the 3-pin fan assembly connected at “SYSFAN1” fan power connector will first run at the speed ratio set by the item “SYS FanEQ Start Control”, and then up to 100%. 2-18 AN52/AN52-E...

  • Page 43: Load Fail-Safe Defaults

    This option protects the BIOS configuration or restricts access to the computer itself. 2.12 Save & Exit Setup This option saves your selections and exits the BIOS setup menu. 2.13 Exit Without Saving This option exits the BIOS setup menu without saving any changes. AN52/AN52-E 2-19...
  • Page 44 2-20 AN52/AN52-E...

  • Page 45: Driver & Utility

    • [Utility]: Click to enter the utilities installation menu. • [abit Utility]: Click to enter the installation menu of utilities exclusively developed by abit. • Browse CD]: Click to browse the contents of this “Driver-&-Utility CD”. • Close]: Click to exit this installation menu.

  • Page 46: Nvidia Nforce Chipset Driver

    The installation screen appears. Follow the prompts on the screen to complete installation. After restarting the system, right-click the Sound Manager icon located at the desktop shortcut. Click item “Sound Manager”. The Realtek HD Audio Manager appears. 3-22 AN52/AN52-E...
  • Page 47 Click the [Audio I/O] tab. Click the pull down menu to select the channel configuration. Click [OK] button to apply the Audio I/O settings and exit. (This screen shot was taken from model “AN52”.) AN52/AN52-E 3-23...

  • Page 48: Cool'n'quiet Driver

    “Automatic Mode” for Cool ‘n’ Quiet to be enabled. 3.5 USB 2.0 Driver There is no need to install this driver for Windows 2000 with Service Pack 4, ※ Windows XP with Service Pack 1, or their later version. 3-24 AN52/AN52-E...

  • Page 49: Abiteq (The Hardware Doctor Utility)

    The abitEQ is a self-diagnostic system that protects PC Hardware by monitoring critical items of Power Supply Voltage, CPU & System Fans Speed, and CPU & System Temperature. To install this utility: Click on the [abit Utility] tab in the installation menu screen. Click the [abitEQ] item. The following screen appears.

  • Page 50: Flashmenu (Bios Update Utility)

    3.7 FlashMenu (BIOS Update Utility) The FlashMenu is a utility to flash the BIOS in a more easily and quickly way. To install this utility: Click on the [abit Utility] tab in the installation menu screen. Click the [FlashMenu] item. The following screen appears.

  • Page 51: Build Nvraid Floppy Disk Under Windows Environment

    SCSI or RAID driver. Press <F6> key, and then follow the screen instruction to complete the installation. To create a driver disk: Click on the [abit Utility] tab in the installation menu screen. Click the [Generate NVRaid Floppy Disk[32bit]] item.

  • Page 52: Build A Driver Disk Under Dos Environment

    Save this selection and exit BIOS setup menu by accessing the BIOS menu “Save & Exit Setup”. Restart the system. The system will now boot from CD, and enter the ABIT Boot Manager, the following options appear (0) Boot From First HDD...

  • Page 53: Multilingual Quick Installation Guide

    • [SLED]: Connecte au câble de la DEL de veille. l’installation de votre carte mère abit. Pour des opérations plus • [PWR]: Connecte au câble de l’interrupteur de l’alimentation avancées, vous devez vous reporter à la version complète.

  • Page 54: Deutsch//Kurze Installationsanleitung

    Diese “Kurze Installationsanleitung” enthält nur die Anschlüsse auf der Vorderseite: [FPIO1] grundlegenden Hardwareinformationen, die Sie zur [HLED]: Kabelanschluss für Festplattenzugriffsanzeige. • Installation Ihres abit-Motherboards benötigen. Details [RST]: Kabelanschluss für Rücksetzschalter. • finden Sie im ausführlichen Handbuch. [SPKR]: Kabelanschluss für Kabelanschluss für •...

  • Page 55: Italiano//Guida All'installazione Rapida

    • [PLED]: collega al cavo LED alimentazione. le informazioni di base sull’hardware necessarie all’installazione della scheda madre abit. Fare riferimento Collettore porta USB aggiuntiva: [FP-USB1], [FP-USB2] alla versione completa della guida per eseguire le Collettore porta IEEE1394 aggiuntiva: [FP-1394-1], [FP-1394-2] operazioni avanzate.

  • Page 56: Español//Guía Rápida De Instalación

    [PWR]: Conecte el cable del interruptor de encendido. • durante la instalación de la placa base abit. Para conocer el [PLED]: Conecte el cable del LED de encendido. • funcionamiento avanzado, es necesario consultar la Terminal de puerto USB adicional: [FP-USB1], [FP-USB2] versión completa.

  • Page 57: Português//Guia De Instalação Rápida

    à • [PWR]: Faz a ligação ao cabo do botão de alimentação. instalação da sua placa principal abit. Para mais • [PLED]: Faz a ligação ao cabo do LED do botão de alimentação.

  • Page 58: Русский//Краткое Руководство По Установке

    основная информация о техническом обеспечении, которая • [PLED]: Соединяется с кабелем индикатора питания. вам может понадобиться при установке материнской платы abit. Описание дополнительных операций вы найдете в Дополнительная насадка порта USB: [FP-USB1], [FP-USB2] полной версии руководства. Дополнительная насадка порта IEEE1394: [FP-1394-1], [FP-1394-2] Предостережения...

  • Page 59: Eesti//Kiirpaigaldusjuhend

    4.7 Eesti//Kiirpaigaldusjuhend Käesolev “Kiirpaigaldusjuhend” sisaldab ainult [SLED]: Ühendage peatusindikaatori (Suspend LED) • abit-emaplaadi paigaldamiseks vajalikku riistvaraalast kaabliga. põhiteavet. Edasijõudnud kasutamiseks tuleb teil ikkagi [PWR]: Ühendage toitelüliti kaabliga. • pöörduda täisversiooni poole. [PLED]: Ühendage toiteindikaatori (Power LED) kaabliga. • Täiendav USB-pordi päis: [FP-USB1], [FP-USB2] Ettevaatusabinõud riistvara paigaldamisel...

  • Page 60: Latviski//Ātrās Instalēšanas Instrukcija

    4.8 Latviski//Ātrās instalēšanas instrukcija Šī “Ātrās instalēšanas instrukcija” ietver tikai pamata [RST]: Pievieno atiestates slēdža kabeli. • norādes iekārtai, kas nepieciešamas, instalējot abit [SPKR]: Pievieno sistēmas skaļruņa kabeli. • mātesplati. Pilnīgākai darbībai nepieciešams iegūt [SLED]: Pievieno LED pārtraukšanas kabeli. •...

  • Page 61: Lietuvių//Trumpas Instaliavimo Vadovas

    [SLED]: Sujunkite su darbo pristabdymo indikatoriaus • informacija apie techninę įrangą, kurios jums gali prireikti kabeliu. instaliuojant pagrindinę plokštę abit. Papildomų operacijų [PWR]: Sujunkite su maitinimo tinklo jungiklio kabeliu. • aprašymą rasite pilnoje vadovo versijoje. [PLED]: Sujunkite su maitinimo indikatoriaus kabeliu.

  • Page 62: Polski//Instrukcja Szybkiej Instalacji

    [SLED]: Podłączenie kabla diody LED wstrzymania pracy. • podstawowe informacje dotyczące sprzętu, wymagane [PWR]: Podłączenie kabla przełącznika zasilania. • podczas instalacji płyty głównej abit. Przy [PLED]: Podłączenie kabla diody LED zasilania. • zaawansowanych operacjach, niezbędne będzie skorzystanie z kompletnej wersji instrukcji.

  • Page 63: Magyar//Gyorstelepítési Útmutató

    4.11 Magyar//Gyorstelepítési útmutató Ez a “Gyorstelepítési útmutató” csak azt az alapvető [PWR]: Csatlakoztassa a tápkapcsoló kábelhez. • hardver információt tartalmazza, amely az abit alaplap [PLED]: Csatlakoztasson a táp LED kábelhez • telepítéséhez szükséges. Az előrehaladott üzemeltetéshez, Kiegészítő USB port fejrész: [FP-USB1], [FP-USB2] továbbra is a teljes útmutatót kell használnia.

  • Page 64: Türkçe//Hızlı Kurulum Kılavuzu

    4.12 Türkçe//Hızlı Kurulum Kılavuzu Bu “Hızlı Kurulum Kılavuzu”, abit anakartınızı takmanızda Ön Panel Konnektörleri: [FPIO1] gerekebilecek sadece temel donanım bilgisini içermektedir. [HLED]: Sabit Disk Sürücü LED kablosuna bağlayın. • İleri işlemler için daha geniş olan tam versiyonuna [RST]: Sıfırlama Anahtarı kablosuna bağlayın.
  • Page 65 ‫دﻟﻴﻞ اﻟﺘﺮآﻴﺐ اﻟﺴﺮﻳﻊ‬ ‫اﻟﻠﻐﺔ اﻟﻌﺮﺑﻴﺔ‬ 4.13 AN52/AN52-E 4-13...
  • Page 66 ‫راهﻨﻤﺎﯼ ﻧﺼﺐ ﺳﺮﻳﻊ‬ ‫ﻓﺎرﺳﯽ‬ 4.14 4-14 AN52/AN52-E...

  • Page 67: 日本語//クイックインストールガイド

    4.15 日本語//クイックインストールガイド • この「クイックインストールガイド」には、abit マ [SPKR]: システムスピーカーケーブルに接続 • [SLED]: サスペンド LED ケーブルに接続 ザーボードを取り付けるときに必要となるハードウ • [PWR]: 電源スイッチケーブルに接続 ェアの基本情報のみが含まれています。詳細な操作 • [PLED]: 電源 LED ケーブルに接続 については、その完全版を参照してください。 ハードウェアのセットアップに関する注意事項 追加 USB ポートヘッダ: [FP-USB1]、[FP-USB2] • ボードを取り付けたり設定を変更するときは、 事前に 追加 IEEE1394 ポートヘッダ: [FP-1394-1]、[FP-1394-2] 電源装置をオフにし、AC コンセントからプラグを必 ず抜いてください。 前面パネルオーディオ接続ヘッダ: [FP-AUDIO1] •...

  • Page 68: 한국어//빠른 설치 가이드

    4.16 한국어//빠른 설치 가이드 본 “빠른 설치 가이드”는 빅빔 abit 메인보드 • [SPKR]: 시스템 스피커 케이블에 연결하세요. [SLED]: 유휴(Suspend) LED 케이블에 연결하세요. • 설치에 필요한 중요한 하드웨어 정보만을 • [PWR]: 전원 스위치 케이블에 연결하세요. 포함하고 있습니다. 보다 상세한 정보 및 과정은...

  • Page 69: Bahasa Malaysia//Panduan Pemasangan Ringkas

    • maklumat perkakasan asas yang anda mungkin perlu [SPKR]: Sambungkan ke kabel Sistem Pembesar Suara. • semasa memasang papan induk abit anda. Untuk [SLED]: Sambungkan ke kabel Gantung LED. • pengendalian lanjutan, anda perlu rujuk ke versi [PWR]: Sambungkan ke kabel Suis Kuasa.

  • Page 70: ไทย//คู ่ ม ื อ การติ ด ตั ้ ง อย่ า งย่ อ

    เป็ น เพี ย งข้ อ มู ล พื ้ น ฐานที ่ จ ำเป็ น ใน [SPKR]:ต่ อ เข้ า กั บ สายลำโพงของระบบ • การติ ด ตั ้ ง แผงวงจรหลั ก abit ของคุ ณ เท่ า นั ้ น กรุ ณ า [SLED]:ต่ อ เข้ า กั บ สาย LED •...

  • Page 71: 繁體中文

    • 支援雙通道 DDR2 800 無緩衝 ECC/非 ECC • 1 個 CD-In 接頭 記憶體 後面板輸入/輸出接頭 網路 • 1 個 PS/2 鍵盤接頭 (只用於 AN52) • 內建 Gigabit 網路 • 1 個 PS/2 滑鼠接頭 • 內建 10/100 網路 (只用於 AN52-E) (只用於 AN52) • 1 個 7.1 聲道音效接頭...

  • Page 72: 快速安裝略說

    4.19.2 快速安裝略說 本「快速安裝略說」僅包含安裝 abit 主機板時所需的 附加的 USB 連接埠接頭：[FP-USB1]、[FP-USB2] 基本硬體資訊。詳細的操作方式，仍請參閱其完整的 除了位於 I/O 面板上的內建 USB 接頭外 ， 您可透過帶有 手冊版本。 支架的延長線，連接這些各有兩個附加 USB 連接埠的 接頭。 硬體安裝注意事項 附加的 IEEE1394 連接埠接頭：[FP-1394-1]、[FP-1394-2] • 安裝機板或變換任何設定之前，請先關閉電源並拔 除了位於 I/O 面板上的內建 IEEE1394 接頭外，您可透 掉電源插頭。 過 帶 有 支 架 的 延 長 線 ， 連 接 這 些 各 有 一 個 附 加...

  • Page 73: 简体中文

    • 支持双信道 DDR2 800 无缓冲 ECC/非 ECC 内存 后面板输入/输出接头 • 1 个 PS/2 键盘接头 网络 • 1 个 PS/2 鼠标接头 • 主板内建 Gigabit 网络 (只用于 AN52) (只用于 AN52) • 1 个 7.1 声道音效接头 (只用于 AN52-E) • 主板内建 10/100 网络 (只用于 AN52-E) • 1 个 5.1 声道音效接头...

  • Page 74: 快速安装略说

    4.20.2 快速安装略说 [PLED]：连接电源 LED 电缆。 本“快速安装略说”仅包含基本的硬件信息，供您在 • 安装 abit 主板时进行参考。如需了解高级操作，仍请 附加的 USB 端口接头：[FP-USB1]、[FP-USB2] 参阅其完整的手册版本。 除了位于 I/O 面板上的板载 USB 连接器外 ， 这些接头可 以通过带线卡的延长电缆分别提供两个附加的 USB 端 硬件设置注意事项 口连接。 • 在安装主板或更改任何设置前，务必关闭电源并从 附加的 IEEE1394 端口接头：[FP-1394-1]、[FP-1394-2] 交流插座上拔掉电源线。 除了位于 I/O 面板上的板载 IEEE1394 连接器外，这些 • 从防静电袋中取出主板前，应戴上静电安全腕带以 接头可以通过带线卡的延长电缆分别提供一个附加的...

  • Page 75: Appendix

    If the situation remains the same, try Step 3. Step 3. The same procedure as Step 2, but while discharging the CMOS data, pull out the ATX power connectors from motherboard and remove the button battery during CMOS discharge. AN52/AN52-E...
  • Page 76 Example: Intel 650 3.4GHz (OC FSB=220MHz) • Memory brand: Type in the brand and model name of your memory module. Example: Memory brand: Kingston (KVR533D2N4/1G) • Memory size: Type in the size of your memory module. Example: 512M* 4PCS AN52/AN52-E...
  • Page 77 See the next page for a blank Technical Support Form, or visit our website to fill in the form on line (http://www.abit.com.tw/page/en/contact/technical.php). Q. Is the motherboard dead? Do I need to return it to where I bought from or go...

  • Page 78: Technical Support Form

    5.1.2 Technical Support Form Region: E-mail: First name: Last Name: Subject: Motherboard: BIOS Version: CPU: Memory brand: Memory size: Memory configuration: Graphics card: Graphics driver version: Power supply maker: Power supply wattage: Storage devices: Optical devices: Other devices: Operating system: Problem description: AN52/AN52-E...

  • Page 79: Contact Information

    Universal ABIT (USA) Corporation 2901 Bayview Drive, Shanghai Fremont, CA 94538, U.S.A. Tel: 1-510-623-0500 Universal ABIT (Shanghai) Co. Ltd. Fax: 1-510-623-1092 FL 19 Xuhui Yuan BLOG NO.1089 Website: http://www.abit-usa.com ZhongShan s 2 RD, ShangHai 200030 The People's Republic of China Latin America: r aymond@abit-usa.com...
  • Page 80 P/N: 4310-0000-79 Rev. 1.00...

This manual is also suitable for:

An52-e

Table of Contents