Download Print this page

Advertisement

Quick Links

ENGLISH
ESPAÑOL
1
Guía de inicio 1
Vi d eo Tutoria ls
S e d i s po n e d e
Avail able
t ut or i a le s e n
v íd e o
RMC: K10405
1
2
1
1
2
3
4
QT5-6923-V01
XXXXXXXX
2
3
Do not connect the USB cable yet.
EN
ES
No conecte aún el cable USB.
2
1
4
(A)
(B)
EN
Check that the ON lamp (A) lights green.
ES
Compruebe que la luz de ACTIVADO (ON) (A)
se ilumina en verde.
EN
If the Alarm lamp (B) is flashing, see "If the Alarm
lamp is flashing:".
ES
Si la lámpara Alarma (Alarm) (B) está
parpadeando, consulte "Si la lámpara Alarma
(Alarm) está parpadeando:".
© CANON INC. 2015
PRINTED IN XXXXXXXX
3
1
2
EN
Be careful of ink on the protective tape.
ES
Tenga cuidado con la tinta de la cinta protectora.
3
Insert the FINE Cartridge into the slot at a slight
EN
upward angle.
ES
Inserte el cartucho FINE (FINE Cartridge) en la
ranura formando un ángulo ligeramente hacia arriba.
4
EN
Push the FINE Cartridge in and up firmly until it
snaps into place.
Empuje el cartucho FINE (FINE Cartridge)
ES
firmemente hacia dentro y hacia arriba hasta
que encaje en su sitio.
1
2

Advertisement

loading

Summary of Contents for Canon K10405

  • Page 1 If the Alarm lamp (B) is flashing, see "If the Alarm lamp is flashing:". Si la lámpara Alarma (Alarm) (B) está parpadeando, consulte "Si la lámpara Alarma (Alarm) está parpadeando:". QT5-6923-V01 XXXXXXXX © CANON INC. 2015 PRINTED IN XXXXXXXX...
  • Page 2 Repeat to install the other FINE Cartridge. Repita de para instalar el otro cartucho FINE (FINE Cartridge). Check that the Alarm lamp is off. Compruebe que la lámpara Alarma (Alarm) esté apagada. Apagada Refer to either depending on how you will use the machine. Consulte dependiendo de cómo vaya a utilizar la máquina.
  • Page 3 If Canon_ij_XXXX does not appear: Now your computer is connected to a Press the Stop button on the printer. If a message saying "Printer is not registered. Perform printer setup?" does not appear at Canon PRINT printer. b Connect the printer to your network.
  • Page 4 Si aparece un mensaje diciendo "Impresora no registrada. ¿Realizar preparación de impresora? (Printer is not registered. Perform printer setup?)" no aparece al iniciar Canon PRINT Inkjet/SELPHY: b Conecte la impresora a su red. Ahora su ordenador estará conectado Realice lo siguiente en la impresora.

This manual is also suitable for:

Pixma mg2900 series