Mounting The Embedded Box Pc On The Wall - Dell Embedded Box PC 5000 Technical Manualbook

NOTE: For more information on connecting the wireless antenna to Embedded Box PC, see the
documentation that is shipped with the wireless antenna.
NOTE: For more information about installing the WWAN card in the Embedded Box PC, see the
Box PC Service Manual at www.dell.com/support.
NOTE: Peripherals such as the wireless antenna, keyboard, and mouse are sold separately.
3. Connect devices using the I/O ports on your Embedded Box PC.
4. Connect the Embedded Box PC to the power source using one of the following methods:
• Connect the power adapter and tighten the sleeves on the adapter pin to secure it to the Embedded Box PC.
• Connect the power terminal block to the adapter port and torque the screws at 5.07 kilograms-centimeter (4.4
pounds-inch) to secure it to the Embedded Box PC.
5. Turn on the Embedded Box PC and complete the operating system setup.

Mounting the Embedded Box PC on the wall

Mount the Embedded Box PC on a wall by using the mounting brackets.
NOTE: The Embedded Box PC is shipped with only those screws that are required for securing the two mounting
brackets to the back of the Embedded Box PC.
1. Secure the two mounting brackets to the back of the Embedded Box PC by using eight M3x8 screws.
NOTE: Torque the screws at 3 to 3.4 kilograms-centimeter (2.6 to 3.0 pounds-inch).
14
Embedded