Installation and configuration
NOTE: The information in this chapter provides an overview of the installation and configuration requirements of
the Embedded Box PC. The Embedded Box PC is designed for specific applications and needs to be installed by
qualified personnel with knowledge of radio frequencies and regulatory requirements. For full installation
instructions, see the
Setting up the Embedded Box PC
1.
Install the Embedded Box PC on a vertical surface like a wall using
2.
Connect to your network using one of the following methods:
•
Connect the network cable.
•
Install the wireless antenna (WLAN 1 and WLAN 2) to enable the wireless connection.
•
Install the mobile broadband antenna (WWAN 1 and WWAN 2) to enable the mobile broadband connection.
Embedded Box PC Installation and Operation Manual that ships with the product.
wall-mount
brackets, or a panel box.
2
13