HP 5305 B Operating And Service Manual page 14

Model 5305B
Operation
9E-3-4
Figure 9E-3-4. 100 MHz Channel Frequency Measurements
1. Apply power to 5300 ac receptacle.
2. Turn counter on with 5300 SAMPLE RATE control.
3. Set RANGE switch to B position.
4. Connect input signal to 100 MHz jack.
5. Set RESOLUTION switch for number of digits desired
in display.
6. Adjust SAMPLE RATE control for convenient interval
between measurements.
7. For high resolution, set RANGE switch to B 10 kHz
MAX - HIGH RESOLUTION X1000. This limits the
input frequency to 10 kHz but gives resolution up to 4
decimal places.