unni UN0581 Operating	 Instruction

unni UN0581 Operating Instruction

Digital wireless weather station

Advertisement

Digital Wireless Weather Station
OPERATING INSTRUCTION
Base unit: UN0581
Wireless sensor: UN02
If you want to know about our features or support solutions, please let us know! We really
hope that owning an Unni Technology product is not only a practical experience, but also a
pleasure.
Please email us at: unni_technology@hotmail.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UN0581 and is the answer not in the manual?

Questions and answers

Jeff
January 26, 2025

Outdoor temp reads LL.L

1 comments:
Mr. Anderson
February 10, 2025

The outdoor temperature display shows "LL.L" on the Unni UN0581 likely because the temperature is below the device's measurable range or the sensor is not transmitting data correctly. Ensure the batteries are properly installed, placed within range, and paired correctly with the base unit.

This answer is automatically generated

Ron
February 9, 2025

Can you switch from F to C

1 comments:
Mr. Anderson
February 11, 2025

Yes, the Unni UN0581 can switch from Fahrenheit to Celsius by pressing the ▼ button.

This answer is automatically generated

Amanda
February 10, 2025

Can I change from Fahrenheit to Celsius ?

2 comments:
Mr. Anderson
February 11, 2025

Yes, you can change the temperature unit from Fahrenheit to Celsius on the Unni UN0581 by pressing the ▼ button.

This answer is automatically generated

Patty
April 17, 2025

@Mr. Anderson please, where is that button located?

Saundra Stebbing
February 19, 2025

My temp. is stuck on 32* Wish you had a tech support # I could call

2 comments:
Matthew Williams
February 25, 2025

@Saundra Stebbing Mine doing the same thing after changing out the low batteries.

Barbara
March 31, 2025

@Matthew Williams

Glenn Beard
March 6, 2025

What does code LL mean?

1 comments:
Glenn Beard
March 6, 2025

@Glenn Beard

Mark Tuttle
April 9, 2025

Outdoor temp displays LL.L

2 comments:
Mr. Anderson
April 10, 2025

The Unni UN0581 outdoor temperature display shows LL.L due to wireless interference between the weather station and the outdoor sensor. To fix this, restart both units and place them close together for about 20 minutes to re-establish a strong connection.

This answer is automatically generated

Mark Tuttle
April 10, 2025

@Mr. Anderson

User image 67f7d5805f0ee
Shirley Blakey
April 27, 2025

How do I change the reading from F to C

Summary of Contents for unni UN0581

  • Page 1 Wireless sensor: UN02 If you want to know about our features or support solutions, please let us know! We really hope that owning an Unni Technology product is not only a practical experience, but also a pleasure. Please email us at: unni_technology@hotmail.com...
  • Page 2: Table Of Contents

    Catalogue Package included ......................3 Technical data........................3 Base unit........................3 Wireless sensor......................3 Product functions......................4 Weather station......................4 Wireless sensor ......................4 Overview of weather station..................5 Operating elements and parts of the weather station and wireless sensor..... 6 How to set up........................7 Insert batteries......................
  • Page 3: Package Included

    Package included: • UN0581 weather station x 1 • UN02 wireless sensor x 1 • 3 batteries - LR03 type (AAA) / 1.5 V (base unit) • 2 batteries - LR6 type (AA) / 1.5 V (wireless sensor) • Operating instructions...
  • Page 4: Product Functions

    Product functions Weather station • Indoor temperature display in °F • Indoor and outdoor humidity display • Outdoor temperature display in °F with up to three wireless sensors at different measurement sites (delivery includes one wireless sensor) • Minimum/maximum display for temperature and humidity •...
  • Page 5: Overview Of Weather Station

    Overview of weather station 1. Illumination backlight 9. Indoor temperature 2. Outdoor temperature 10. Dew point 3. Max/Min outdoor temperature/humidity 11. Low battery indicator for indoor 4. Outdoor humidity 12. Weather forecast symbol 5. Outdoor humidity trend 13. Outdoor temperature trend 6.
  • Page 6: Operating Elements And Parts Of The Weather Station And Wireless Sensor

    Operating elements and parts of the weather station and wireless sensor Operating buttons Button INDEX * Switch: mold indicator, dew point, heat index * Set mode for weather symbol Button MEM * Display stored MAX and MIN values Button * Display weather data from various wireless sensors ( channel 1.2.3) * Reconnect wireless sensor connection Hole for wall mounting Detachable stand...
  • Page 7: How To Set Up

    Red pilot light TX button Sliding switch 1 2 3: Set sensor number (transmission channel) Battery compartment Loop for hanging Note: If you are going to use the wireless sensor included in the package, there is no need to change the transmission channel inside the outdoor sensor. Changing the transmission channel is only necessary when you are going to add additional wireless outdoor sensor.
  • Page 8: Pairing The Outdoor Sensor With The Weather Station

    Pairing the outdoor sensor with the weather station Once the weather station is installed batteries), it will start receiving the pairing RF signals from the outdoor sensor with the same channel for 3 minutes. You can touch the button on the base unit to match the correct outdoor sensor. Generally, the outdoor sensor will connect with the base unit automatically.
  • Page 9: Daily Max/Min Data

    Daily MAX/MIN data All MAX / MIN temperature/humidity records will reset automatically at 12:00 (midnight). From normal display, press and release the MEM button to view: • MAX-- indoor and outdoor temperature/ humidity records. • MIN-- indoor and outdoor temperature/ humidity records. You can display the measured minimum and maximum values of the current day by pressing the MEM button repeatedly in succession in the normal time display mode.
  • Page 10: How To Add Extra Sensors

    Temperature alarm - If the wireless sensor measures a temperature between 33.8 °F and 30.2°F, there is a risk of frost and a snowflake symbol will flash. If the temperature falls below 30.2°F for an extended period of time, the snowflake symbol will be constantly displayed.
  • Page 11: Where The Weather Station Should Be Placed

    Note: • Shielding building materials such as reinforced concrete reduce or prevent the radio reception between the base station and wireless sensor. • Devices such as televisions, cordless phones, computers and fluorescent tubes can also interfere with the wireless reception. •...
  • Page 12: Safety

    Safety Read the following advice carefully and store these operating instructions in case you want to reread something later. If you give the item to someone else, give them these operating instructions as well. • This device may be used by children over 8 years of age and over, as well as by persons with reduced physical, sensory or mental abilities, or lack of experience and / or knowledge if they are supervised or instructed regarding the safe use of the equipment and have understood the resulting hazards.
  • Page 13: Disclaimers

    Warranty and support Unni Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. Before returning a product, please contact our friendly customer support with questions:...

This manual is also suitable for:

Un02

Table of Contents

Save PDF