Eggrider Display Compatibility; How To Find Out Controller Brand; Compatibility List - EggRider V2 User Manual

7. EggRider display compatibility

There are two main things to consider for compatibility:
• Hardware - voltage, connector and pinout compatibility
• Software - communication protocol compatibility
Warning
Having the same
connector/pinout
Attention
EggRider V2 is not compatible with CAN bus systems.

7.1 How to find out controller brand?

Attention
It is important to identify your controller brand, do not confuse this with the motor brand.
You can find the controller by following the display cable.
If you have a hub wheel motor, most probably your controller is Kunteng or Lishui.
The hub motor ebikes mostly have the controller in an aluminum box attached to the frame or integrated in
the battery mount or the bike frame.
If you identified your controller as Kunteng(KT) or Lishui(LSW), keep in mind that there are more types of
connectors, not only julet/higo 5 pin waterproof.

7.2 Compatibility list

7.2.1 Bafang hub motors
Bafang hub motors are not neccesarly compatible. It is important to understand what controller brand you have. Please read all this
page carefully.
7.2.2 Bafang mid drive motors
Bafang mid-drive motors have 2 types of controllers based on the communication protocol
1. UART communication - Compatible
2. CANbus communication - Not Compatible
or bike model doesn't guarantee a compatibility.
- 72/89 -
7. EggRider display compatibility
Copyright © 2019 EggRider.