Advertisement
Quick Links
MODEL:GRANGE - 5
PRODUCT SIZE(400x500x302CM): PLEASE REFER TO PACKING LIST BELOW
PLEASE READ CAREFULLY BEFORE ASSEMBLY
Item No. & Packing List
Product Size
(LxWxH)
400x500x302CM
600x500x302CM
800x500x302CM
1000x500x302CM
etc.
Assembly Instructions
ALU. No. 1
ALU. No. 2
1CTN
1CTN
1CTN
1CTN
1CTN
1CTN
1CTN
1CTN
1CTN
1CTN
Packing List
ALU. No. 3
ALU. No. 4
1CTN
1CTN
1CTN
2CTN
1CTN
3CTN
1CTN
4CTN
etc.
1CTN
PC No.1
PC No.2
1CTN
2CTNS
1CTN
3CTNS
1CTN
4CTNS
1CTN
5CTNS
etc.
1CTN
Advertisement
Related Manuals for Sproutwell GRANGE - 5
Summary of Contents for Sproutwell GRANGE - 5
- Page 1 Assembly Instructions MODEL:GRANGE - 5 PRODUCT SIZE(400x500x302CM): PLEASE REFER TO PACKING LIST BELOW PLEASE READ CAREFULLY BEFORE ASSEMBLY Item No. & Packing List Packing List Product Size (LxWxH) ALU. No. 1 PC No.1 PC No.2 ALU. No. 2 ALU. No. 3 ALU.
- Page 2 Assembly and Maintenance Advice 1. For safety purposes, we strongly recommend that the product will be assembled by at least two people. 2. Some parts have sharp edges. Please be careful when handling components. Always wear gloves, shoes and safety goggles during assembly. 3.
- Page 3 4. The unique design allows the greenhouse to be easily extended at any stage in 2m long sections as detailed in the table of Front Page. 5. A steel base is not required as the aluminium base frame is fixed to the necessary concrete footings with the expansion bolts provided, alternatively you can easily secure it to a timber base with timber screws (not provided).
- Page 4 POLYCARBONATE ORIENTATION PLEASE NOTE: We have recently changed our polycarbonate film. All panels must be installed with the white film facing inside and the clear film with writing facing the sun. If you have any questions please feel free to contact us.
- Page 5 ALU. Box No.1 PART PART QTY. QTY. L04A L01A L02C L04C L02D L04D L02F L04E L05A L02G L05B L03C L08A L03D L08B L03E L03F ALU. Box No.2 PART PART QTY. QTY. L01B L01C L08B L02A L02B L15A L02E L02F L04B L05B L05C L04E...
- Page 6 ALU. Box No.3 PART PART PART QTY. QTY. QTY. L18A M6X12 L18B M6X20 L18C L18D Ø5X15 L18E Ø4X16D L18F Ø5X30 L16A Ø4X10 L16B L16C M8X60 J03R/L 2/2 L05G W08A L05H J02R/L 2/2 M5X35 Ø...
- Page 7 ALU. Box No.4 (2 Section Assembly) PART PART PART PART QTY. QTY. QTY. QTY. L02A L02B L08B L02F L02H M6X12 L15A L02K M6X20 L03A L03B Ø4X16D L04B Ø5X30 L05B L04E W08A 2 Ø4X10 L05C M5X35 L05D M8X60...
- Page 8 PC Box No.1 PART QTY. PC Box No.1 PC Box No.2 x 2PCS (2 Section Assembly) PART QTY. PC Box No.2...
- Page 9 PART PART PART PART QTY. QTY. QTY. QTY. L01A L01B M8x60 J03R/L 1/1 L01C L02C L02D J02R/L 1/1 L02F L02G L03E L03F Ø4X10 M6x12 L04A Ø3.2X10 L04C Ø4X16D L04D Overview of Front Assembly L05A L08A L01C L08B L04C L02F L01B L04D L04A L01A...
- Page 10 PART PART PART PART QTY. QTY. QTY. QTY. L01A L01B M8x60 J03R/L 1/1 L01C L02C L02D J02R/L 1/1 L02E L02F L02G M6x12 L03C L03D Ø4X16D L04D Overview of Back Assembly L04E L05A L05B L01C L02E L08A L02F L01B L08B L04D L04E L01A L04D...
- Page 11 PART PART PART QTY. QTY. QTY. PART QTY. L02A L02B L02F L02H M6X12 L02K L03A Ø5X30 L03B L04B M8X60 W08A 4 L04E L05B M5X35 L05C L05D Overview of 4 Section Assembly L05D L02B L08B L03B L04B L02F L02F L04E L02B L05B L02K L03A...
- Page 12 PART PART PART QTY. QTY. QTY. PART QTY. L02A L02B L02F L02H M6X12 L02K L03A Ø5X30 L03B L04B M8X60 W08A 2 L04E L05B M5X35 L05C L05D Overview of Middle Section Assembly L05D L02B L08B L03B L04B L02F L02F L04E L02B L05B L02K L03A...
- Page 13 10MM Expansion Screw / Concrete Ground * It is crucial the a + b dimensions are the same to ensure the base is square. Support at corners only is not adequate.
- Page 14 GRANGE-5 (4 x 5M) Back Assembly Front Assembly 43.4mm 4 Section Assembly Item No. etc. 4 x 5M 6 x 5M 8 x 5M 10 x 5M 12 x 5M 14 x 5M 16 x 5M 18 x 5M Dimensions 5061.8 5061.8 5061.8...
- Page 15 GRANGE-5 + 2 Section Assembly (6 x 5M) Front Assembly Back Assembly 2 Section Assembly GRANGE-5 * The basic model, GRANGE-5, can be easily extended by adding a '2 Section Assembly' each time for a longer size.
- Page 16 1000 1000 1000 1000 1000 1000 Front Back 2 Section Assembly GRANGE-5 * This shows a layout for W05's positions where it is placed in the middle of PC panel for each section.
- Page 17 PART QTY. Door1 Assembly L18A L18B L18C L18C L18D L18E L18F L18A L16A L16B L16C L16C L05G L05G L05G L18B L05H M6x12 Ø5X15 L18C L18C L16C L18A L16C L18A L18B L18B...
- Page 18 Door2 Assembly L18B L18A L16A L05G L05G L16B L18B L18C L16A L18A L16A L18A L16B L16B...
- Page 19 Door3 Assembly L18E L18E L18D L18D L18F L05H L05H L18E L18F L05H L05H L18E L18D L18F L18E L18E...
- Page 20 PART QTY. Roof Vent Assembly L15A L15A M6x20 Ø4X16D Ø4X10...
- Page 21 L08A L08B L08B L08B L08A L08A L08B L08B L08B L08A J03R/L L08B L08A L08B&A L08A L08B L08A&B J03R/L J03R/L L08B L08A L08B L08A L08B L08B J03R/L Assemble all W05 followed by previous Page 15 after each base profile is connected.
- Page 22 L03C L01A L03D L01A L01A L01A L03C&D...
- Page 23 L02E L02F L02C L02F L02D L02G L05B L05B L05A L02G L05A L03C&D L01A L01A L02G&F L02G L02G L05A L02G&F L05A L05A L02C L02D L03C&D L05A L02F L08A L08A L02E L02C&D&E L02E L02F&G L05B L05B L08B...
- Page 24 Ensure orientation of the L07 profile is correct as per detail. CORRECT WRONG L03A L03A D&E L03A L01A L03A...
- Page 25 L05B L02A L05C L05B L05C L02A L02A S01x3pcs L02A L08B L05C L03A L05B L02A L08B...
- Page 26 L03B L03B...
- Page 27 L02K L02H L02H L03B L03A L02K L02H L02H...
- Page 28 Ensure orientation of the L07 profile is correct as per detail. CORRECT WRONG L01A L01A L03B L01A L07 G D&E A&B L01A L03A...
- Page 29 L02A S01x3pcs L02A L08B L05C L05B L02A L05C L05B L02A L03A L05C L03E&F L05B L05B L08B L03F L03E...
- Page 30 L02D L02G L04A L05A L02G L02C L05A L03E&F L01A L01A L02G L02G L02G L05A L05A L04A Slide 3 x S01 into L04A, and tighten L04A at each S01x3pcs end with S01. L04A L03E&F L05A L02C L02D L05A L02C&D L02G L08A L08A...
- Page 31 L04C L02F L03E&F L04C L04C L02F L02F L04A Y14 Y14 Y2 Y14 Y14...
- Page 32 L04D L04D L04E L04E L04D L04D L04D L04D L04D&E S01x2pcs Slide 2 x S01 into each L04D & E, and put each profile onto the edge of each PC panel, then tighten all profiles at each end with S01.
- Page 33 L01B L01C L01C L01B L01B L01C L01B L01C...
- Page 34 L01B L01C...
- Page 35 L02B S01x6pcs L02A L02B L02B L02B...
- Page 36 L02F L02F L02F L02F L03B L01B&C L02F L02F L02F L02B...
- Page 37 Roof Vent Assembly x 4PCS L15A * The roof vents should be lifted through the vent L15A opening from the inside of the greenhouse, then lowered into position from above the greenhouse. So the holes of the L15A line up with the ridge holes.
- Page 38 Insert all Y6 panels into each side of greenhouse. Note: If it is difficult sliding any panels in the channels, using soapy water or olive oil in the channels can reduce the friction. Insert all Y7 panels into each roof of greenhouse.
- Page 39 L04B L04B L04E L04E L04B Once the L04B is in place. A small bead of silicon suitable for polycarbonate can assist in preventing leaks. S01x2pcs Pay attention to the cut edge of L04B which should be fixed, facing down. L04E Pay attention to the cut edge of L04E which should be fixed, facing up.
- Page 40 L05D L05D Insert all Y9 panels into each roof of greenhouse. Note: If it is difficult sliding any panels in the channels, using soapy water or olive oil in the channels can reduce the friction.
- Page 41 Door2 Assembly Door1 Assembly Install the L09 gutter profile over the Door3 Assembly edges of the panels, ensuring the rubber strip seals against the panels. Then fix into place with the Z03 screws, do not over tighten. When installing the J06 and the second section of gutter, it can help if you have 2 people, one guiding the gutter into the J06 and the other gently tapping the end of the gutter with a rubber mallet.
- Page 42 J02R/L J02R/L J02R/L J02R/L Once the L09 is in place. A small bead of silicon suitable for polycarbonate can assist in preventing leaks. To avoid leaking, using silicone on J02R / L, T08 and J07 is an option (see Fig. below). J02R/L Drill one hole on both L01A approx 500mm up from the bottom, Dia.
- Page 43 Z04& S04 Z04& S04 L04D L04D Drill the holes on each L04D as shown, Dia.3.2mm, and secure the hooks W10 with Z04 & S04, then ensure W01 works with Door1 & 2 & 3 properly when the doors are open.
Need help?
Do you have a question about the GRANGE - 5 and is the answer not in the manual?
Questions and answers