Table of Contents
Advertisement
AUS
NTS16
Operation/Maintenance and cleaning
Blowing (Fig. 3)
Use the joint nozzle (16) for blowing applications to clean dust and dirt in hard to
reach places.
IX. Maintenance and cleaning
Pull out the power plug before every maintenance operation. There is a risk of elec-
trocution or of injury from moving parts.
Maintenance
The appliance is maintenance free.
Emptying the Container (Fig. 1)
The container is full if the suction power will decrease significantly.
Switch off the appliance and disconnect the power plug.
Remove the machine head (2) by opening the locking hooks (4).
Empty the container into a rubbish bin or suitable container for disposal.
Cleaning
It is recommended to clean the appliance after each use.
Never direct a water jet against the appliance, nor clean the appliance under
flowing water. This could give rise to the danger of electric shock and damage
the appliance!
Always keep the appliance clean. Do not use any detergents or solvents.
• Always keep the ventilation slots clean and free from dirt and dust.
• Clean the container (6) with a damp cloth.
• Wash the foam filter (13) with lukewarm water and soap and allow to dry.
• Beat the dust out of the cloth filter (18) and clean it with a paint brush or hand
brush.
• Replace the paper filter bag (14) when full.
Replacement parts
Replacement parts can be ordered (e.g. paper bag, filter) by contacting After Sales
Support.
AFTER SALES SUPPORT
17
1300 855 831
support@scheppach.com.au
MODEL: NTS16 PRODUCT CODE: 706650 10/2021
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Ferrex NTS16 and is the answer not in the manual?
Questions and answers
Will not work, turn on, fuse checked and is good.
If the ALDI Ferrex NTS16 does not turn on despite a good fuse, possible issues could include:
- A damaged power cable (check for cuts, wear, or damage).
- A faulty on/off switch.
- The machine not being properly plugged in.
- Internal electrical issues requiring manufacturer service.
- The need to reset or check the power supply.
Ensure the power cable is intact and securely connected. If the issue persists, contact after-sales support.
This answer is automatically generated