The ALDI Ferrex WDV12 wet and dry vacuum cleaner is powered by a mains connection of 220-240 V~ 50-60 Hz. The power supply comes from a mains cable with a length of 3 meters.

This answer is automatically generated

Summary of Contents for ALDI Ferrex WDV12

Page 1: Table Of Contents
If you are not entirely satisfied with this Assembly product, please return it to your nearest ALDI store within 60 days from Operation the date of purchase for a full refund or replacement, or take advantage of our after sales support by calling the supplier’s Customer Service Hotline.
Page 2: Overview
Overview Utilisation Pack contents/parts WDV12 Contents of Box Wet & Dry Vacuum cleaner Castors Suction hose Foamed plastic filter Paper bag Cloth filter Crevice nozzle 3-part suction tube Floor nozzle Instruction manual Warranty certificate AFTER SALES SUPPORT  support@scheppach.com.au  1300 855 831 MODEL: WDV12 PRODUCT CODE: 703406 10/2020...
Page 3 WDV12 AFTER SALES SUPPORT 1300 855 831  support@scheppach.com.au  MODEL: WDV12 PRODUCT CODE: 703406 10/2020...
Page 4: Explanation Of Symbols
Explanation of symbols WDV12 Explanation of Symbols Read the operating instructions to reduce the risk of injury. Class II symbol: This high pressure cleaner is designed with dual insulation and does not need to be connected to an earthed power socket. Compliance with the Australian requirements.
Page 5: Introduction
Introduction WDV12 I. Introduction Congratulations on choosing to buy a FERREX product. ® All products brought to you by FERREX are manufactured to the highest ® standards of performance and safety, and as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty. We hope you will enjoy using your purchase for many years to come.
Page 6: Layout
Introduction/Layout/Scope of delivery WDV12 In addition to the safety notes contained in the present operating instructions and the special regulations of your country, the generally recognised technical rules for the operation of this appliance must be observed. II. Layout (Fig. 1.1, 1.2, 1.3) Handle On/Off switch Appliance head...
Page 7: Intended Use
WDV12 Scope of delivery/Intended use/Safety regulations • Open the packaging and take out the appliance carefully. • Remove the packaging material as well as the packaging and transport bracing (if available). • Check that the delivery is complete. • Check the appliance and accessory parts for transport damage. •...
Page 8 Safety regulations WDV12 • People and animals must not be vacuumed with the machine. • Do not vacuum any hot, incandescent, flammable, explosive materials, or those which endanger health. This includes hot ashes, petrol, sol- vents, acids or caustic solutions. Personal injury could occur. •...
Page 9: Technical Data
WDV12 Safety regulations/Technical data • Do not expose the unit to rain CAUTION! The following states how damage to the appliance and possi- ble injury to people can be avoided: • Ensure that the machine is correctly assembled and the filters are in the correct position.
Page 10: Assembly
Assembly WDV12 VII. Assembly m Warning! Ensure the appliance is correctly and completely assembled before use. Unpacking (Fig.1.1) Unlock the locking hooks (8) and remove the appliance head (3). Remove all accessories from the container (7). Mounting of the castors (Fig.2) Place the container (7) upturned on the ground.
Page 11: Operation
WDV12 Assembly/Operation Fitting the suction hose (Fig. 7) Connect the suction hose (11) to the corresponding connector on the wet and dry vacuum cleaner, depending on the application required. Vacuuming: Connect the suction hose (11) to the suction hose connector (4). Blowing: Connect the suction hose (11) to the blow connector (10).
Page 12 Operation WDV12 Wet vacuuming (Fig. 1.3) For wet-vacuuming, use the foamed plastic filter (12). Ensure that the foamed plastic filter (12) is correctly mounted. When wet vacuuming, the safety float valve on the filter basket (9) will close when the maximum level is reached. The motor will continue running, but the suction will decrease significantly.
Page 13: Maintenance And Cleaning
WDV12 Maintenance and cleaning IX. Maintenance and cleaning Pull out the power plug before every maintenance operation. There is a risk of elec- trocution or of injury from moving parts. Maintenance The appliance is maintenance free. Emptying the Container (Fig. 1) The container is full if the suction power will decrease significantly.
Page 14: Troubleshooting
Troubleshooting/Storage/Disposal and recycling WDV12 X. Troubleshooting Problem Possible Cause Action Check plug socket, cable, line, plug and fuse, where approp- Mains voltage is not present. riate, repair through electrical specialist. Appliance does not Defective On/Off switch. start. Worn carbon brushes. Repair through customer service.
Page 15: Warranty Details
WET & DRY VACUUM CLEANER Warranty Details REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion.
Page 16 WDV12 AFTER SALES SUPPORT  support@scheppach.com.au 1300 855 831  MODEL: WDV12 PRODUCT CODE: 703406 10/2020...
Page 17: Repair And Refurbished Goods Or Parts Notice
Please be assured though, refurbished parts or replacements are only used where they meet ALDI’s stringent quality specifications. If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint.
Page 18 WDV12 AFTER SALES SUPPORT  support@scheppach.com.au 1300 855 831  MODEL: WDV12 PRODUCT CODE: 703406 10/2020...

This manual is also suitable for:

703406

ALDI Ferrex WDV12 Original Instructions Manual

Quick Links

Need help?

Questions and answers

Related Manuals for ALDI Ferrex WDV12

Summary of Contents for ALDI Ferrex WDV12

This manual is also suitable for:

Table of Contents