Assembly - ALDI Ferrex WDV12 Original Instructions Manual

AUS

Assembly

VII. Assembly
m Warning! Ensure the appliance is correctly and completely assembled
before use.
Unpacking (Fig.1.1)
1 Unlock the locking hooks (8) and remove the appliance head (3). Remove all
accessories from the container (7).
Mounting of the castors (Fig.2)
1 Place the container (7) upturned on the ground.
2 Push the castors (5) into the holes at the bottom of the container.
Mounting appliance head (Fig.3)
1 Place the appliance head (3) onto the container (7). Secure the appliance head
(3) with the locking hook (8). When fitting the appliance head (3), make sure that
the locking hook (7) locks into place correctly.
Fitting the filter (Fig.4/5)
Never use the appliance without a filter! Always ensure that the filters are
correctly mounted
1 Fitting the foamed plastic filter (12): For wet-vacuuming, slip the supplied foamed
plastic filter (12) over the filter basket. (Fig.4)
2 Fitting the cloth filter (14): For dry vacuum cleaning always use the supplied
cloth filter (14). Slip the cloth filter (14) over the filter basket. (Fig.5)
Assembling the paper bag (Fig.6)
For vacuuming all kind of dry dirt it is recommended that you use the paper bag (13).
Slip the paper bag (13) over the vacuuming hole inside of the container (7). The pa-
per bag (13) is suitable for dry-vacuuming only. The paper bag (13) makes it easier
to dispose of the sucked-in dust.
14
 support@scheppach.com.au
MODEL: WDV12 PRODUCT CODE: 703406 10/2020
AFTER SALES SUPPORT

WDV12
1300 855 831