FERREX MM4115A User Manual
  1. Manuals
  2. Brands
  3. FERREX Manuals
  4. Sander
  5. MM4115A
  6. User manual

FERREX MM4115A User Manual

Belt and disc sander by aldi
Hide thumbs
Table of Contents

Advertisement

Quick Links

Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly. In
the event of product failure within its intended use over the course of the
first 3 years after date of purchase, we will remedy the problem as quickly
as possible once it has been brought to our attention. In the unlikely event
of such an occurrence, or if you require any information about the product,
please contact us via our helpline support services, details of which are to be
found both in this manual and on the product itself.
GB
IE
PRODUCED IN CHINA FOR:
ALDI STORES LTD. PO BOX 26, ATHERSTONE
WARWICKSHIRE, CV9 2SH
ALDI STORES (IRELAND) LTD.
PO BOX 726, NAAS, CO. KILDARE
Visit us at www.aldi.com
AFTER SALES SUPPORT
+44(0) 1904727501
+353(0) 19022605
GB
IE
support@coreservice.co.uk
MODEL:
MM4115A
3
805501
YEAR
WARRANTY
07/2021
User Manual
BELT AND DISC SANDER
Original User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MM4115A and is the answer not in the manual?

Questions and answers

Related Manuals for FERREX MM4115A

Summary of Contents for FERREX MM4115A

  • Page 1 ALDI STORES LTD. PO BOX 26, ATHERSTONE WARWICKSHIRE, CV9 2SH ALDI STORES (IRELAND) LTD. PO BOX 726, NAAS, CO. KILDARE Visit us at www.aldi.com AFTER SALES SUPPORT 805501 +44(0) 1904727501 +353(0) 19022605 support@coreservice.co.uk YEAR MODEL: WARRANTY MM4115A 07/2021 Original User Manual...

  • Page 2: Overview

    Overview...
  • Page 3 Overview 21 20...

  • Page 4: Scope Of Delivery/Device Components

    Scope of delivery/device components Scope of delivery/device components Belt and Disc Sander Screw M5x12 (x4) 45° Mitre gauge Disc guard Worktable rod Screw M4 x 14 Rubber foot (x4) Flat washer M4 (x2) Cord wrap (x2) Worktable assembly Big flat washer M5 (x12) Spanner 10x13 mm Screw M5x16 (x4) Hex key 3, 4, 6 mm (3 pcs)

  • Page 5: Table Of Contents

    Table of content Table of content Overview........................2 Scope of delivery/device components..............4 General information....................6 Reading and storing the operating manual..............6 Intended use........................6 Explanation of symbols..................... 7 Safety........................8 General safety notes for power tools................8 Check the device and scope of delivery..............14 Assembly instruction.....................

  • Page 6: General Information

    General information General information Reading and storing the operating manual This operating manual is part of the belt and disc sander (hereinafter also called "device"). It contains important information on how to set up and use the device. Before using the device, read the operating manual carefully, in particular the safety instructions.

  • Page 7: Explanation Of Symbols

    General information Explanation of symbols The following symbols and signal words are used in this user manual, on the device or on the packaging. This symbol provides you with useful additional information on handling and use. Declaration of conformity (see chapter “Declaration of conformity”): Products marked with this symbol meet all the applicable Community regulations of the European Economic Area.

  • Page 8: Safety

    Safety Safety The following signal words are used in this operating manual. This signal symbol/word denotes a WARNING! hazard with an average risk level that could lead to death or severe injury if it is not avoided. This signal symbol/word denotes a CAUTION! hazard with a low risk level that could lead to mild or moderate injury if it is...
  • Page 9 Safety Power tools create sparks which may ignite the dust or dust. fumes. - Keep children and bystanders away while operating a Distractions can cause you to lose control. power tool. Electrical safety - Power tool plugs must match the outlet. Never modify the plug in any way.
  • Page 10 Safety tool while you are tired or under the influence of drugs, A moment of inattention while alcohol or medication. operating power tools may result in serious personal injury. - Use personal protective equipment. Always wear eye Protective equipment such as a dust mask, non- protection.
  • Page 11 Safety Using and handling the power tool - Do not overload the power tool. Use the appropriate The right power tool allows you to power tool for your work. work better and safer in the specified power range. - Do not use any power tool that has a defective switch. Power tools that can no longer be switched on or off are dangerous and must be repaired.
  • Page 12 Safety The use of power tools for applications other performed. than those intended can lead to dangerous situations. - Keep handles and grip surfaces dry, clean and free of oil Slippery handles and grip surfaces hinder safe and grease. operation and control of the power tool in unforeseen situations.
  • Page 13 Safety - Make sure that the sanding machine is stably positioned on firm ground. Do this by mounting the sanding machine firmly on a suitable work surface. - Check all screws regularly to make sure they are tight. - Avoid uncomfortable working positions. Ensure secure footing and keep your balance at all times.

  • Page 14: Check The Device And Scope Of Delivery

    Safety - Never leave the sanding machine unattended. Always switch off the device and only leave it once the tool has completely come to a standstill. • Please be aware that the sanding disc and sanding belt will continue to run for a short while when the device is switched off.

  • Page 15: Assembly Instruction

    Check the device and scope of delivery NOTE! Risk of damage! If opening the packaging with a sharp knife or other pointed objects, careless handling can damage the device. - Therefore, be very careful when opening. 1. With both hands, lift the device out of the packaging. 2.

  • Page 16: Mounting The Base Plate

    Assembly instruction Mounting the base plate - Screw the base plate to the belt and disc sander as shown in the illustration. Use the 4 mm hex key supplied. Attaching the cord wrap 1. Unscrew the two screws with flat washers anticlockwise at the positions shown. 2.

  • Page 17: Attaching The Disc Guard

    Assembly instruction Attaching the disc guard - Firmly screw on the disc guard as shown in the illustration. Attaching worktable to sanding disc 1. Use the 13 mm spanner to loosen the hexagon screw slightly by turning it anticlockwise. 2. Guide the worktable rod into the opening until it reaches the limit stop as shown in the illustration.

  • Page 18: Attaching Worktable To Belt Sander

    Assembly instruction 3. Tighten the hexagon screw on the device by turning it clockwise. 4. Align the worktable so that it is no more than 1.6 mm away from the sanding disc and tighten the hexagon screw as shown in the illustration. 5.
  • Page 19 Assembly instruction 1. Unscrew the hexagon screw and the flat washer on the work support using the 10 mm spanner 2. Unscrew both of the screws on the belt dust outlet 3. Remove the work support. 4. Use the 6 mm hex key to loosen the fixing screw as shown in the illustration.

  • Page 20: Before First Use

    Assembly instruction 7. Use the 13 mm spanner to loosen the hexagon screw slightly by turning it anticlockwise. 8. Guide the worktable rod into the opening until it reaches the limit stop as shown in the illustration. 9. Align the worktable (see section "Attaching worktable to sanding disc") and tighten the screws.

  • Page 21: Turning The Device On And Off

    Operation NOTE! Risk of damage! Unsuitable insertion tools or incorrect settings can damage the device or insertion tools. - Use suitable insertion tools. - Use appropriate settings for the insertion tool and the specific application. This chapter describes how to operate the device. The following instructions for use serve for your own safety and for successful, safe use of the device.

  • Page 22: Mitre Sanding

    Operation 1. Loosen the table lock knob by turning it anticlockwise. 2. Use the bevel gauge to set the desired tilt angle. 3. Set the spacing between the worktable and the sanding disc to a maximum of 1.6 mm. 4. Tighten the table lock knob by turning it clockwise. Mitre sanding Use this setting to sand short ends, for instance.

  • Page 23: Sanding Flat Surfaces

    Operation 3. Use the scale to set the desired angle. 4. Tighten the fixing screw by turning it clockwise. 5. Switch the device on (see section "Turning the device on and off"). 6. Move the workpiece from left to right with the guide of the mitre gauge on the sanding disc Sanding flat surfaces 1.

  • Page 24: Sanding Curved Surfaces

    Operation Sanding curved surfaces - Hold the workpiece firmly and sand it in the area of the position shown by pressing it evenly against the sanding belt and moving it gently back and forth. Cleaning WARNING! Risk of electric shock! Improper handling of the device can cause electric shock.

  • Page 25: Maintenance

    Maintenance Maintenance 1. Remove the disc guard as shown in the illustration. 2. Pull the sandpaper off the sanding disc and replace it with an equivalent piece. 3. Reattach the disc guard (see section "Attaching the disc guard"). Replacing the sanding belt 1.

  • Page 26: Adjusting Belt Tracking

    Maintenance 4. Bring the sanding belt into the vertical position (see section "Attaching worktable to belt sander"). 1. Remove the lower belt cover 2. Pull off the sanding belt as shown in the illustration. 3. Replace the sanding belt with an equivalent belt. Pay attention to the belt running direction.

  • Page 27: Testing

    Maintenance 1. Turn the tracking knob 1/4 of a revolution clockwise if the sanding belt moves towards the sanding disc 2. Turn the tracking knob 1/4 of a revolution anticlockwise if the sanding belt moves away from the sanding disc. 3.

  • Page 28: Transport

    Storage - Store the device in a clean, dry, frost-protected place out of the reach of children. 1. Thoroughly clean the device (see “Cleaning”). 2. Always store device parts and accessories together with the device. 3. If possible, pack the device in the original packaging. Transport Transport the device and its accessories in the original packaging and protect them from blows and vibrations.

  • Page 29: Technical Data

    Technical data Technical data Model number: MM4115A Item number: 805501 Input voltage: 230-240 V~, 50 Hz Power consumption: 500 W Sanding belt speed (without load): 7.6 m/s Motor speed (without load): 2950 min Disc no-load speed: 2360 min Sanding disc size:...
  • Page 30 Technical data Warning! The vibration and noise emissions can deviate from the stated values during actual use of the power tool. This depends on the way the power tool is actually used and especially on the type of workpiece you are working on. It is necessary to establish safety measures that protect the operator based on an estimate of the exposure during actual conditions of use (taking into account all parts of the operating cycle, such as periods when the power tool is switched off and...

  • Page 31: Declaration Of Conformity

    Original EU Declaration of Conformity MEROTEC GmbH Otto-Brenner-Str. 8, 47877 Willich, Germany herewith declare under our own, sole responsibility that our product Belt and disc sander Model no. MM4115A complies with the following directives: 2006/42/EC Machinery Directive 2014/30/EU EMC-Directive 2011/65/EU...

  • Page 32: Disposal

    Disposal Disposal Disposing of packaging Dispose of packaging according to type. Sort the paperboard and cardboard as waste paper and the film as recyclable material. Dispose of old electrical device This symbol indicates that this product may not be disposed of together with domestic waste in compliance with the (2012/19/EU) Regulation pertaining to waste electrical and electronic devices (WEEE).

This manual is also suitable for:

805501

Table of Contents