Table of Contents
Advertisement
Quick Links
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly.
In the event of product failure within its intended use over the course of the
first 3 years after date of purchase, we will remedy the problem as quickly
as possible once it has been brought to our attention. In the unlikely event
of such an occurrence, or if you require any information about the product,
please contact us via our helpline support services, details of which are to be
found both in this manual and on the product itself.
GB
IE
PRODUCED IN CHINA FOR:
ALDI STORES LTD. PO BOX 26, ATHERSTONE
WARWICKSHIRE, CV9 2SH.
ALDI STORES (IRELAND) LTD.
PO BOX 726, NAAS, CO. KILDARE.
Visit us at www.aldi.com
3
AFTER SALES SUPPORT
703625
00800 4003 4003
GB
IE
service.uk@scheppach.com
YEAR
MODEL:
WARRANTY
BDG915
07/2020
User Manual
BELT&DISC SANDER
Original Instructions
Contents
Overview ..................................................................................4
Package contents/part list ......................................................6
Explanation of symbols ...........................................................9
Introduction ........................................................................... 10
Layout ......................................................................................11
Scope of delivery .....................................................................11
Intended use ...........................................................................12
General safety instructions for power tools ..........................12
Before starting the equipment ............................................. 16
Attachment and operation .................................................... 16
Working instructions ............................................................. 19
Cleaning and maintenance ....................................................20
Technical data ........................................................................ 21
Storage and transport ........................................................... 22
Electrical connection .............................................................. 22
Disposal and recycling ........................................................... 23
Troubleshooting..................................................................... 24
Declaration of Conformity ..................................................... 26
Advertisement
Table of Contents
Related Manuals for FERREX BDG 915
Summary of Contents for FERREX BDG 915
-
Page 1: Table Of Contents
User Manual Contents Overview ..................4 Package contents/part list ............6 Explanation of symbols ............9 Introduction ................10 Layout ..................11 Scope of delivery ..............11 Intended use ................12 General safety instructions for power tools ......12 BELT&DISC SANDER Before starting the equipment ..........16 Great care has gone into the manufacture of this product and it should Attachment and operation ............ -
Page 2: Package Contents/Part List
Package contents/part list Belt&Disc sander Locking screw for grinding/sanding table Grinding belt (pre-assembled) Stop rail Grinding/sanding disk Cross stop Grinding/sanding table Warranty card Instruction manual... - Page 3 max. 1,6 mm...
-
Page 5: Explanation Of Symbols
Explanation of symbols Explanation of symbols Warning! In case of non-compliance danger to life, risk of injury or damage to the tool possible! Read the operating instructions to reduce the risk of injury. Wear safety goggles. Wear ear-muffs. Wear a breathing mask. Important! Risk of injury! Never reach into the run- ning sanding belt / disc. -
Page 6: Introduction
Introduction I. Introduction Congratulations on choosing to buy a FERREX product. ® All products brought to you by FERREX are manufactured to the highest standards of per- ® formance and safety, and as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 3 Year Warranty. -
Page 7: Layout
Layout/Scope of delivery II. Layout (Fig. 1, 2, 5, 6, 7 , 11) Locking screw for grinding/sanding table Angle scale Suction connection Base plate Allen screw Grinding belt Stop rail Knurled screw for grinding/sanding belt adjustment Support leg 10 Grinding/sanding belt tensioner Grinding/sanding disk On/Off switch Cross stop... -
Page 8: Intended Use
Intended use/ General safety instructions for power tools IV. Intended use The belt and disc sander is used for sanding all types of wood, depending on the size of the machine. The machine meets the currently valid EU machine directive. •... - Page 9 General safety instructions for power tools b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is eart- hed or grounded. c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Page 10 General safety instructions for power tools 4) Power tool use and care a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b.
- Page 11 General safety instructions for power tools • If the machine tends to tilt or walk (especially when sanding long and heavy panels), it must be fastened to a solid surface of sufficient carrying force. • Make sure the sanding belt runs in the correct direction – see arrows at the back of the belt. •...
-
Page 12: Before Starting The Equipment
Before starting the equipment/Attachment and operation VI.Before starting the equipment Before you connect the equipment to the mains supply make sure that the data on the rating plate are identical to the mains data. m WARNING! Always ensure the machine is switched off and disconnected from the power supply before making adjustments to the equipment. - Page 13 Attachment and operation Changing the grinding/sanding belt (6) (Fig. 6 - 9) • Pull out the power plug • Remove the screws (18). • Remove the grinding/sanding belt guard (19). • Turn the grinding/sanding tensioner (10) to the right in order to reduce the tension on the grinding/sanding belt (6).
- Page 14 Attachment and operation Using the belt/disc sander as portable tool If your belt/disc sander is to be used as a portable tool, it is recommended you fasten it per- manently to a mounting board that can easily be clamped to a workbench or other stable surface.
-
Page 15: Working Instructions
Working instructions VIII. Working instructions Bevel sanding, Fig. 14 The worktable can be tilted from 0° to 45° for bevel sanding. To tilt the worktable: • Loosen the fixing screw (1). • Set worktable to desired angle. Note: Position the worktable not further than 1/16 in. (1.6 mm) from the sanding surface. -
Page 16: Cleaning And Maintenance
Working instructions/Cleaning and maintenance Sanding outside curves on sanding disc Fig. 19 Always sand outside curves using the sanding disc and moving the workpiece (W) from the left side of center as shown in Figure 19 • Hold the workpiece firmly, keeping fingers away from the sanding disc. •... -
Page 17: Technical Data
Technical data X. Technical data Dimensions l x w x h mm 470 x 370 x 330(640 highest position) Ø disc mm Belt dimensions mm 100 x 915 Belt speed m/min Belt tilt 0° - 90° Table tilt 0 - 45 Weight kg 16.5 Motor V/Hz... -
Page 18: Storage And Transport
Storage and transport/Electrical connection XI. Storage and transport Store the equipment and accessories out of children’s reach in a dark and dry place at above freezing temperature. The ideal storage temperature is between 5 and 30 °C. Store the electric tool in its original packaging. m ATTENTION! The appliance must unconditionally be secured against falling or turning down during transport. -
Page 19: Disposal And Recycling
Electrical connection/Disposal and recycling AC motor • The mains voltage must be 230 - 240 V~ • Extension cables up to 25 m long must have a cross-section of 1.5 mm Connections and repairs of electrical equipment may only be carried out by an electrician. Please provide the following information in the event of any enquiries: •... -
Page 20: Troubleshooting
Troubleshooting XIV. Troubleshooting Problem Possible Cause Action a-d) Replace all damaged parts a) ON/OFF switch damaged. before you use your machine Motor doesn’t b) power cord damaged. again. start c) switch relay damaged. e) Contact your local service centre. d) Fuse blown. Every attempt to carry out a re- e) Motor burnt. -
Page 22: Declaration Of Conformity
EU-direktivo in normami za artikel Marke / Brand: FERREX Band- und Tellerschleifer - BDG 915 Art.-Bezeichnung / Article name: Belt & Disc Sander - BDG 915 703625 Art.-Nr. / Art. no.: 2014/30/EU 2000/14/EC_2005/88/EC 2011/65/EU*...
Need help?
Do you have a question about the BDG 915 and is the answer not in the manual?
Questions and answers