GAC MOTOR GAC7130H2A5 User Manual page 73

1. Engine malfunction indicator light (yellow)
– With the Start switch at Position "ON", if the
engine is not started, the indicator light
illuminates and then extinguishes after self-
checking.
– After the engine starting, if the indicator light
is lit, it indicates that there is a fault in the
engine system.
2. Emission malfunction indicator light
(yellow)
– With the Start switch at "ON" position, if the
engine is not started, the indicator light is lit.
– After the engine starting, if the indicator is still
on, it indicates that there is a fault in the
exhaust system.
3. Electronic park brake (EPB) state indicator
light (red, green) (apply to certain models)
– If the indicator light is lit (red), it indicates that
the EPB is applied.
– If the indicator light (red) flashes, it indicates
that the EPB is partly engaged or failed.
– If the indicator light is lit (green), it indicates
that electronic automatic parking is activated.
4. Parking brake and brake system indicator
light (red)
– If the indicator light is lit, it indicates that the
hand brake is set, the brake fluid level is too
low or there is a fault in the electric
brakeforce distribution (EBD) system.
5. Tire pressure monitoring system (TPMS)
indicator light (yellow) (apply to certain
models)
– If the indicator light is lit, it indicates that there
is a fault in TPMS.
6. Charging system warning light (red)
– With the Start switch at "ON" position, if the
engine is not started, the warning light is lit.
– After the engine starting, if the warning light
is lit, it indicates that there is a fault in the
charging system.
7. Left turn signals and hazard warning
(green)
indicator lights
– When the left turn signal indicator light
flashes alone, it indicates that the left turn
light is turned on.
2. Operating System and Equipment
– When the hazard warning indicator light
switch is pressed, the left/right turn signal
indicator lights will flash together with all the
outside turn signals.
8. High-beam indicator light (blue)
– If the indicator light is lit, it indicates that high
beams are turned on.
9. Position light indicator light (green)
– If the indicator light is lit, it indicates that the
position lights, instrument panel lighting lamp,
number plate lights, etc are turned on.
10. Front fog indicator light (green) (apply to
certain models)
– If the indicator light is lit, it indicates that front
fog lights are turned on.
11. Right turn signals and hazard warning
indicator lights
– When right turn signal indicator light flashes
alone, it indicates that the right turn lights are
turned on.
– When the hazard warning indicator light
switch is pressed, the left/right turn signal
indicator lights will flash together with all the
outside turn signals.
(green)
63