Control Lock; Cleaning Lock; Operating The Cooktop Extractor; Switching The Fan On And Off - bora X Pure Operating And Installation Instructions

6.4.3

Control lock

The control lock prevents the current settings from
being changed accidentally or without permission.
If the control lock is active, the
O
symbol
lights up
The functions are locked and the operating panel
O
is dimmed (exception: power button).
Activating the control lock
Long press on the lock button
X
The operating panel is dimmed.
O
The lock button lights up.
O
All functions are deactivated except for the power
O
button and the lock button.
i
If the system is switched off when the control
lock is active, the control lock will no longer
be active next time the system is switched on.
Deactivating the control lock
Long press on the lock button
X
The standard display lights up and the operating
O
panel is reactivated.
The lock button is dimmed.
O
6.4.4

Cleaning lock

The cleaning lock prevents settings from being
changed when wiping the operating panel during
a cooking session. When activated, the operating
panel is locked for 10 seconds. The remaining
time is displayed. All appliance settings remain
unchanged in the meantime. Once the time has
lapsed you can use the functions again.
Activating the cleaning lock
Tap the cleaning button
X
The cleaning button lights up.
O
The operating panel is locked.
O
The remaining seconds are shown in the multi-
O
function display.
Deactivating the cleaning lock early
Long press on the cleaning button
X
The cleaning button is dimmed.
O
The operating panel is unlocked.
O
www.bora.com
.
.
.
Functions and operation
6.5 Operating the cooktop
extractor
6.5.1

Switching the fan on and off

Switching the fan on
The fan is switched on by setting the fan power
level.
Set the fan power level.
X
The fan symbol lights up.
O
The set fan power level is shown in the multi-
O
function display.
Switching the fan off
Swipe downwards to power level 0
X
or
tap until power level 0 is reached
X
or
long press on the fan button
X
or
long press on the fan power level in the multi-
X
function display.
The automatic after-run function is started.
O
6.5.2

Setting the fan power level

The fan power levels can be set in
3 different ways.
By tapping a certain position on the slider
X
or
by swiping until you reach the required power
X
level
or
by tapping on or
X
6.5.3

Fan power setting

When the power setting is activated, maximum
extractor power is available for a predefined time.
This power setting makes it possible to suction
away high levels of cooking vapours more quickly.
After 5 minutes, the power setting is automatically
switched to power level 9.
Activating the fan power setting
Tap on when power level 9 is active.
X
appears in the display.
O
EN
.
109