Related Manuals for John Lewis DAY & NIGHT ROLLER BLIND
Summary of Contents for John Lewis DAY & NIGHT ROLLER BLIND
- Page 1 Please retain these instructions for future reference. DAY & NIGHT ROLLER BLIND INSTRUCTION MANUAL John Lewis Partnership Made in China 171 Victoria Street Batch code: London SW1E 5NN johnlewis.com...
-
Page 2: Video Instructions
It is recommended that this blind should only be installed by persons To avoid strangulation and entanglement, keep cords out of reach of children. competent in DIY. At John Lewis, we are committed to making great products possible. From our in-house Design Team, to our Buyers, we work together to Cords may become wrapped around a child’... - Page 3 BLIND POSITIONING Outside recess mount Inside recess mount Decide on the position You may need to trim the Decide on of the blind so that it position of overlaps on both sides recess. Recess needs to be your blind equally, at least 5cm. in the blind mechanism.
- Page 4 TRIMMING THE BLIND Slot the top and bottom bar back to the correct position. Mark a line where you wish to cut the fabric. Marking the Reposition fabric the top and bottom bar NEXT STEP Product assembly on following page Cutting the fabric When cutting the top bar it is important...
-
Page 5: Product Assembly
PRODUCT ASSEMBLY Use the brackets as templates and mark the hole positions with a pencil. Drilling holes Blind Removal for brackets Please note: Additional fasteners other than those sent with your blind may be required depending on the tile or stone need special plugs and drill bits. Remember to always pre-drill holes in wood to avoid splitting. Fasten the brackets onto the wall or ceiling and then click the covers on. -
Page 6: Product Information
GUIDE TO WALL MOUNTING & FIXINGS KEY INFORMATION Warning: You can use one of the following types of wall plug if your walls are made of brick, FIXINGS breezeblock, concrete, stone or wood. General Purpose wall plug installer. Generally aerated blocks should not be used to support Please note that the screws provided with this product are suitable for a solid brick wall.
Need help?
Do you have a question about the DAY & NIGHT ROLLER BLIND and is the answer not in the manual?
Questions and answers
How do you fit the bottom hanging pole
The document does not provide explicit instructions on fitting the bottom hanging pole. However, it mentions that after trimming the blind, the top and bottom bars should be slotted back into position. This suggests that the bottom hanging pole should be repositioned and secured after any necessary adjustments to the fabric.
This answer is automatically generated
Hi pls could you advise how to remove the blind to replace it once it's come to the end of its life.