Advertisement
Quick Links
7mm
. Operating the blind
To operate the blind pull the chain to lower and raise to desired position.
. Care instructions
To prevent serious soiling, you can regularly dust the blind with a feather duster or use a vacuum
cleaner on low power. If there are stains, we would advise that you remove the fabric following the
below steps:
Unhook the cord guides from the stitched safety rings (7a). Then carefully remove the bottom bar
which is tucked into bottom pocket. At the top of the blind , pull the fabric off the Velcro fastener.
We recommend the fabric be sent for professional dry clean only.
To replace (7b) re attach clips and carefully re install bottom bar.
b
a
Please retain these instructions for future reference.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China
Batch Code :
Video instructions
Scan the QR code to link to our online videos
that guide you in getting a perfect t for a
Venetian or Roller blind. Alternatively follow
the link johnlewis.com/blindassembly
7
User manual
Roman blind
7mm
1
Advertisement
Related Manuals for John Lewis Roman blind
Summary of Contents for John Lewis Roman blind
- Page 1 . Operating the blind User manual To operate the blind pull the chain to lower and raise to desired position. Roman blind . Care instructions To prevent serious soiling, you can regularly dust the blind with a feather duster or use a vacuum cleaner on low power.
- Page 2 Thank you for purchasing this Roman Blind. Please read the instructions carefully before use Assembly to ensure safe and satisfactory operation of this product. It is recommended that this blind should only be installed by persons competent in DIY. 1. Positioning the blind A Inside the recess Decide on the position of the blind so that it will be clear of any latches and fixtures.
- Page 3 5. Additional Safety device 3. Installing the blind A. Make sure that the downward folds are facing outwards. Present the headrail to its brackets, resting it on top of them. B. Tilt the head-rail forward and back to engage with the lip of the bracket. C.
Need help?
Do you have a question about the Roman blind and is the answer not in the manual?
Questions and answers
Hi, my brackets are not the same as these and I need to know which way up they go
To install the brackets for a John Lewis Roman blind, follow these steps:
1. Decide Positioning:
- Inside the recess: Ensure the blind is clear of any latches or fixtures.
- Outside the recess: Ensure the blind overlaps equally on both sides (at least 5 cm).
2. Attach Brackets to Headrail: Insert the brackets into the channel on the reverse of the headrail.
3. Mark Bracket Positions:
- Hold the blind in the desired position, ensuring it is centered and level.
- Use a pencil to mark the location of each bracket.
4. Remove Brackets: Detach the brackets from the headrail by pressing the locking tab at the bottom of each bracket.
5. Mark Screw Hole Positions: Place the brackets on the location markings and mark the desired screw hole positions.
6. Fix Brackets:
- Use the screws provided to attach brackets to wood.
- For masonry, use appropriate fixings such as wall plugs, expansion bolts, or toggle bolts, depending on the mounting surface.
Note: Additional fasteners may be required depending on the surface (e.g., wallboard, plaster, brick, tile, or stone).
This answer is automatically generated