Panasonic KX-TVS50 Subscriber's Manual page 42

Voice processing system
Hide thumbs Also See for KX-TVS50:
Table of Contents

Advertisement

Glossary
Called Party ID
(Sometimes referred to as Follow-On ID) Allows the PBX to dial extra digits to bring the
caller directly to a specified mailbox, rather than to the General Delivery Mailbox.
Caller ID Call Routing
(Available with APT/DPT Integration only.) The VPS automatically sends calls from
pre-assigned Caller ID numbers to the desired extension, mailbox (including System
Group Distribution List) or Custom Service.
Caller Name Announcement (System/Personal)
(Available with APT/DPT Integration only.) The VPS announces prerecorded Caller ID
caller's names when: (1) extension users listen to messages from pre-assigned
numbers left in the their mailboxes, (2) the VPS transfers calls from pre-assigned
numbers to the users (Caller ID Screening), and (3) the VPS pages the users by
intercom (Intercom Paging).
If the same Caller ID number is programmed for both system and personal caller name
announcements, the VPS will use the personal caller name.
Company Greeting (KX-TVS80 only)
Up to 32 Company Greetings can be recorded to greet callers. One (or System
Greeting or none) can be selected for each Day, Night, Lunch, Break, and Holiday
service on a port basis and trunk (CO line) basis.
Company Name (KX-TVS80 only)
This is played by the VPS to the intended receiver of an External Delivery Message
when she is unable to enter correctly the password (if required). This helps her to
realize where the call came from.
Covering Extension
This can be a destination for Incomplete Call Handling Service. This can also be
accessed by pressing [0] while a Personal Greeting is being played, or while a caller
is leaving a message.
Custom Service Setting
Allows one-touch access to extensions, other custom service menus, fax machine,
mailboxes, etc. A greeting can be recorded for each of the 100 menus to give verbal
directions to the non-subscribers.
Default Setting
A parameter defined for the system at the factory which can be changed through
system programming by the System Administrator or the System Manager.
42

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tvs80

Table of Contents