Table of Contents
Advertisement
1. Right pod
2. Right support bracket
4
Installing the Seat Belt
Parts needed for this procedure:
1
Left seat-belt bracket—Machines without MyRide only
Right seat-belt bracket—Machines without MyRide
1
only
1
Seat-belt assembly
1
Seat-belt buckle
4
Bolt (1/2 x 1-1/4 inches)
4
Locknut (1/2 inch)
2
Self-tapping screw (1/4 x 5/8 inch)
Bolt (7/16 x 1-1/4 inches)—Machines with MyRide
2
only
Machines without MyRide
1.
Install the left and right seat-belt brackets using
1 bolt (1/2 x 1-1/4 inches), 1 locknut (1/2 inch),
and 1 self-tapping screw (1/4 x 5/8 inch) for
each bracket
(Figure
N∙m (75 ft-lb).
Figure 6
3. Battery ground cable
4. Cable
7). Torque the bolts to 102
g239269
1. Locknut (1/2 inch)
2. Right seat-belt bracket
2.
Install the seat-belt assembly and buckle to the
brackets using 2 bolts (1/2 x 1-1/4 inches) and 2
locknuts (1/2 inch) as shown in
the bolts to 102 N∙m (75 ft-lb).
1. Locknut (1/2 inch)
2. Seat-belt buckle
3. Right seat-belt bracket
6
Figure 7
3. Self-tapping screw (1/4 x
5/8 inch)
4. Bolt (1/2 x 1-1/4 inches)
Figure
8. Torque
Figure 8
4. Bolt (1/2 x 1-1/4 inches)
5. Left seat-belt bracket
6. Seat-belt assembly
g222620
g222621
Advertisement
Table of Contents
