Figure 21 Jumper Positions For Capacity Clip To 32Gb - Hitachi CinemaStar P7K500 Specifications

5.3.4.3
Capacity clip to 32GB
The figure below shows the jumper positions used to select Device 0, Device 1, Cable Selection, or Device
1 (Slave) Present while setting the drive capacity down either to 32GB for the purpose of compatibility.
I
G
H
I G
H
I
G
H
I G
H
Notes:
The jumper setting acts as a 32GB clip which clips the LBA to 66055248. The CHS is unchanged from the
factory default of 16383/16/63.
HITACHI Deskstar & CinemaStar P7K500 Hard Disk Drive specification (Rev 1.1)
E C A
F D B
E C A
F D B
E C A
F D B
E C A
F D B

Figure 21 Jumper positions for capacity clip to 32GB

39
DEVICE 0 (Master)
DEVICE 1 (Slave)
CABLE SEL
DEVICE 1 (Slave) Present