Advertisement
RESET : Press RESET button located under the POWER button on left side of main body (it is not marked).
COLD RESET : Disconnect the AC or Car Adapter, turn off battery switch (located on the right side of main body).
Wait 10 seconds, reconnect AC or Car Adapter and turn the battery switch to ON.
Initialize
Press Initialize
Gas Gauge Status
Press
Gas Gauge Status
Quit
Active Sync
Press
Active Sync
[ x ] button
Active Sync
A
Mass Storage
RESET
REBOOT
The mode when USB is
connected is changed to
Active Sync.
B
COLD
RESET
CAUTION : After initialize, quickly perform
COLD RESET.
Performing INITIALIZE will reset the map update
countdown.
Active Sync is for factory use only.
APPLY
USB
connection
PC side indication at USB connection
State of
shipment
(No.MA272)1-9
Advertisement
