Advertisement
5. MAINTENANCE
NOTE: Service your tool regularly. This shall keep your tool in good working condition and extend its service life.
DO NOT use abrasive and corrosive agents to clean the tool. These types of products damage your tool.
8
DO NOT repair it yourself. Repairs and inspections should be performed by a qualified person or an authorized service centre (please
8
contact your stockist).
5.1.
AFTER EACH USE
Check the rod and tool body for cleanliness, wear, damage, etc. If you notice damage, wear or malfunction, DO NOT use the tool and
submit it to a qualified service for inspection and repair.
5.2.
AIR FILTER
Check the air filter after each use. Remove the filter cover (fig.4) by unscrewing the central screw and lift out the filter housing.
Remove the filter from the housing and clean it using warm water and detergent. Dry thoroughly before replacing.
Change the air filter after each season (or after 50 hours of use).
5.3.
SPARK PLUG
Check, clean and readjust, if necessary, the spark plug every 6 months. In case of replacement, contact the after-sales service.
5.4.
GEAR OIL INJECTION PORT (FIG.7)
After 30 hours of use, change the oil. Remove the valve with a spanner. Drain the oil inside.
Add new special oil (gear oil, SAE 85W / 90, 150 ml maximum). Replace the valve.
5.5.
STORAGE
5.5.1.
Clean the machine
Store the machine in a dry and safe place. It should be out of the reach of children.
Place the machine in its packaging to avoid contact with the drill rod.
When storing for long periods of time, empty the fuel tank completely.
Fig.7
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
PHA100
Issue 2 (3,4)
17/09/21
Advertisement
