Rear Panel (Right Side) - Sony HKCA-700 Operation Manual

Rear Panel (right side)

1 RET 1 button
2 RET 2 and AUX 1 /
AUX 2 / AUX 3 buttons
3 CURSOR STORE button
4 H-POSI control
5 WIDTH control
6 V-POSI control
7 HEIGHT control
1 RET 1 (return video 1) button
Pressing this button will allow viewing of the return
video 1 signal on the viewfinder screen.
2 RET2 (return video 2) and AUX 1 / AUX 2 /
AUX 3 buttons
Simultaneously pressing the RET 2 button and the
AUX 1, AUX 2, or AUX 3 button will allow viewing
of the return video 2, 3, or 4 signal from the HDCU on
the viewfinder screen.
3 CURSOR STORE button
Press this button to store the size and position of the
box cursor.
Note
If the CURSOR ON button 5 is not lit, box cursor
information cannot be stored.
RET 2 RET 1
AUX 1 AUX 2 AUX 3
STORE CURSOR
1 2 3
H-POSI V-POSI
ON
WIDTH HEIGHT
R G
Y
B
CALL
4 H-POSI (horizontal position) control
Adjusts the horizontal position of the box cursor
displayed on the viewfinder screen.
5 WIDTH control
Adjusts the width of the box cursor displayed on the
viewfinder screen within the safety zone.
See the description of the SAFETY ZONE switch.
6 V-POSI (vertical position) control
Adjusts the vertical position of the box cursor
displayed on the viewfinder screen.
7 HEIGHT control
Adjusts the height of the box cursor displayed on the
viewfinder screen within the safety zone.
See the description of the SAFETY ZONE switch.
Pushrod hole
8 CURSOR memory 1, 2,
and 3 buttons
9 CURSOR ON button
!º Video signal selection
switch
!¡ CALL button
9(E)