NOTE: Do not use or leave the device in direct sunlight or a hot environment such as a vehicle etc. that is in hot environment. Overhea ng can damage the device - Do not overcharge the device – do not leave the device on the charger for very long a er the ba ery has been fully charged - Device should be protected from any physical impact or damage and care should be taken not to drop the device...
Page 7
1. TFT ON/OFF 10. OPEN 19. SETUP 2. MODE 11. REW 20. DC IN 3. PREV 12. PLAY/PAUSE 21. OFF/ON 4. MENU 13. STOP 22. AV IN 5. VOL- 14. DOWN 23. AV OUT 6. NEXT 15. FWD 24. PHONE 7.
Page 13
four , Text To Speech. 1.4 TEXT TO SPEECH ON: set this on, it will speech when you press any bu ons. OFF: Disable the text to speech func on.
Page 14
AND CONTRAST 4.1 TV TYPE Press to change TV TYPE (NTSC/AUTO/PAL)
Page 15
0000 0000 The default password is (0000) to change the parental level .
Page 16
Insert a U drive or a card reader into the USB port. Press [USB/SD from the remote or DVD/ USB/SD from the DVD] to select USB mode to play the readable files in it. insert a SD/MMC card into the SD/MMC card port. Press [USB/SD from the remote or DVD/USB/SD from the DVD] to select MCR mode to play the readable files in it.
Page 17
For service assistance and product information, please call: 1-800-968-9853. Pour obtenir assistance et information appelez: 1-800-968-9853. Curtis International Ltd. 7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3 www.curtisint.com...
Need help?
Do you have a question about the SDVD1332-B CP2 and is the answer not in the manual?
Questions and answers