Manufacturer's Recycling And Energy Information - NEC M Series User Manual

Manufacturer's Recycling and Energy Information

NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as
one of the company's top priorities in trying to minimize the burden placed on the environment. We are
engaged in developing environmentally friendly products, and always strive to help define and comply
with the latest independent standards from agencies such as ISO (International Organization for
Standardization) and TCO (Swedish Trades Union).
Disposing of your old NEC product
The aim of recycling is to gain an environmental benefit by means of re-use, upgrading, reconditioning
or reclamation of material. Dedicated recycling sites ensure that environmentally harmful components
are properly handled and securely disposed. To ensure the best recycling of our products, NEC
DISPLAY SOLUTIONS offers a variety of recycling procedures and gives advice on how to handle the
product in an environmentally sensitive way, once it has reached the end of its life.
All required information concerning the disposal of the product and country-specific information on
recycling facilities can be found on our following websites:
https://www.nec-display-solutions.com/p/greenvision/en/greenvision.xhtml (in Europe)
Energy Saving
This monitor features an advanced energy saving capability. When a Display Power Management
signal is sent to the monitor, the Energy Saving mode is activated. The monitor enters a single Energy
Saving mode.
For additional information visit:
https://www.nec-display-solutions.com/ (in Europe)
For ErP requirement/For ErP (Network standby) requirement:
Except for conditions below:
[POWER SAVE] is set to [DISABLE].
[SLOT POWER] is set to [ON].
[CEC] is set to [MODE1] or [MODE2].
The monitor is using an Option Board.
[MODE] in [POWER SAVE SETTING] is set to [LOW POWER].
[AUTO INPUT CHANGE] is set to a setting except for NONE.
[USB POWER] is set to [ON].
[QUICK START] is set to [ENABLE].
Power consumption (Glowing amber): 2.0 W or less.
Time for power management function: 10 sec. (Default setting).
Power consumption (Blinking amber): 0.5 W or less.
Time for power management function: 3 min. (Default setting)
20