Table of Contents
Advertisement
Available languages
Available languages
TABLE OF CONTENTS
1. SAFETY INSTRUCTIONS
THE SAFETY OF YOU AND OTHERS IS VERY IMPORTANT TO
CANON CORPORATION. IMPORTANT SAFETY MESSAGES AND
INFORMATION ARE CONTAINED IN THIS SHEET AS WELL AS ON
THE MACHINE ITSELF. PLEASE MAKE SURE YOU CAREFULLY
READ AND UNDERSTAND ALL OF THESE BEFORE OPERATING
THE MACHINE.
THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY
MESSAGE IN THIS OPERATION INSTRUCTIONS MANUAL.
THIS SYMBOL INDICATES A POTENTIAL PERSONAL
SAFETY HAZARD THAT COULD HURT YOU OR OTHERS.
THE FOLLOWING PICTORIAL IS FOUND ON THE MULTI FUNCTION
PROFESSIONAL PUNCHER - B1 (MFPP-B1):
This safety symbol means that you might get
seriously hurt or killed if you open the
product and expose yourself to hazardous
voltage. NEVER remove the screwed on
covers. ALWAYS refer service requirements
to qualified service personnel.
Multi Function Professional Puncher - B1
3
3
3
4
4
4
5
6
Important safeguards
Use the MFPP-B1 only for its intended purpose of punching paper
and covers according to the indicated specifications.
Retain this Operation Instructions manual for future use.
CAUTION: THE PRINTER ON/OFF SWITCH DOES NOT
CUT OFF POWER FROM THE PUNCH.
The MFPP-B1 must be connected to a supply voltage
corresponding to the electrical rating of the machine operation
instructions (also listed on the serial number label).
The grounding plug is a safety feature and will only fit into the proper
grounding-type power outlet. If you are unable to insert the plug into
an outlet, contact a qualified electrician to have a suitable outlet
installed.
Do not alter the plug on the end of the cordset (if provided) of the
MFPP-B1. It is provided for your safety.
Unplug the MFPP-B1 before moving the machine or whenever the
machine is not in use for an extended period of time.
Do not operate the MFPP-B1 if the machine has a damaged power
supply cord or plug. Do not operate the machine after any
malfunction. Do not operate the machine in case of liquid spills, or
if the machine has been damaged in any other way.
Do not overload electrical outlets beyond their capacity. To do so
may result in fire or electrical shock.
Cleaning
You may clean the exterior of the MFPP-B1 using a soft, damp
cloth.
Do not use detergents or solvents as damage to the machine may
occur.
EN
7
10
10
11
15
3
Advertisement
Chapters
Table of Contents
