Download Print this page

Charging - Cognex DataMan 8072 DL Reference Manual

Hide thumbs Also See for DataMan 8072 DL:

Table of Contents

Connection Options

Charging

When you are reading codes with your wireless reader, blinking red status indicators signal a low battery. As the battery

discharges, the blink frequency increases. A blinking red status indicator indicates low battery or thermal shutdown

mode.

You can also check check the status of the battery in the DataMan Setup Tool.

Place the reader on the base station for charging. Make sure that the pins at the end of the handle make contact with the

pins in the base station.

Table of Contents

Table of Contents

Do you have a question about the DataMan 8072 DL and is the answer not in the manual?