Section 1 - Compool To Easytouch Pool And Spa Control System Upgrade Overview; Compool Easytouch Pool And Spa Control System Upgrade Overview; Compool Upgrade Systems; Operating Easytouch - Pentair Pool Products Compool Installation And User Manual

®
Compool EasyTouch
Welcome to the Compool EasyTouch upgrade Pool and Spa Control system − The next generation in
automatic control systems. Your Compool EasyTouch upgrade system opens up a wide range of automation
features. Your EasyTouch eight auxiliary system allows you to automatically control all of your spa and pool
daily operations. Pool and spa service operations can be manually controlled from the EasyTouch outdoor
control panel located at the pool equipment pad. Also available is the optional Indoor Control Panel and
Wireless Control Panel which allows automatic control of pool and spa operations from inside your home or
outside around your pool area.
The EasyTouch eight auxiliary circuit system is factory configured to operate as a "shared" equipment system
or it can be configured as a "single body" system (see page 64). For EasyTouch menu settings, see page 14.
The EasyTouch eight auxiliary system can control high voltage (120 VAC / 240 VAC) equipment, automatic
valve actuators, pumps, lighting, a conventional heater or a solar heating system and the optional IntelliChlor
salt chlorine generator.

Compool upgrade systems

The following Compool systems can be upgraded to the Compool/EasyTouch system: Compool CP3xxx
models (see page 66 and 67), also Compool TimeMaster, CP/LX100, CP1000, CP2000 and CP3000 models.
Note: To upgrade Compool TimeMaster, CP/LX100, CP1000, CP2000 models requires Compool/
EasyTouch control panel upgrade kit with transformer P/N 521247). Otherwise CP3xxx systems
require P/N 521107. For Compool/EasyTouch Control Panel with or without Transformer Kit installation
instructions, see page 65).

Operating EasyTouch

The EasyTouch system is designed to automatically control your pool and spa equipment, lights and other
optional equipment. However, you can also manually control all EasyTouch system operations from the outdoor
control panel. Using the "Mode" button, the system can be switched from "Auto" mode (normal operating
mode) to "Service" mode for manual operation and service purposes. Using the outdoor control panel buttons
you can manually override any automatic settings. If required, the EasyTouch outdoor control panel can be
password protected. To access a password protected control panel, the correct four digit password must be
entered before access is granted (see page 49).
IntelliChlor ® Electronic Chlorine Generator
The optional IntelliChlor salt chlorination system allows the EasyTouch
system to automatically control water sanitization by using a low
concentration of salt (sodium chloride) in the pool and spa water. The
IntelliChlor is enabled from the "IntelliChlor" Settings menu (see page 35).
IntelliChlor automatically converts the salt into free chlorine which eliminates
bacteria and algae in the pool and spa water. The chlorine will then revert
back to sodium chloride after killing the bacteria. The outcome of this
continuous cycle, practically eliminates the need to use sanitizing chemicals in
the pool/spa water. When the pool and spa water is replenished due to
backwashing or draining, more salt may need to be added to the pool/spa water. IntelliChlor model IC20 (P/N
520554/520556) is designed for swimming pools up to 20,000 U.S. gallons (75,000 liters). Model IC40 (P/N
520555/520556) is designed for swimming pools up to 40,000 U.S. gallons (151,000 liters). IC60 Cell (P/N
521105): Designed for pools up to 60,000 U.S. gallons (227,124 liters). The pool chlorination amounts may
vary depending on number of pool occupants, temperature, environment conditions, rainfall and other elements
that might affect the pool water.
®
Pool and Spa Control System Upgrade Overview
Compool/EasyTouch Pool and Spa Control System Upgrade Installation and User's Guide
1
Section 1
Overview
IntelliChlor Electronic
Chlorine Generator