HP EN5000 User Manual page 52

My receiver can't find my access point
• Verify that your access point is not broadcasting
silently.
• Try moving the receiver closer to your access point.
• Check your WEP settings. See "wireless
encryption" on page 42.
My receiver finds my access point, but
won't connect
• Most likely your WEP settings are incorrect. See
"wireless encryption" on page 42.
• Try resetting the power on the access point.
How do I reset my media receiver?
• Under normal circumstances, you should not need
to reset your receiver. However, to fully reset the
media receiver, disconnect the power adapter from
the back. Wait a few seconds, then plug the power
back in.
48
hp digital media receiver
My media receiver has no antenna
• Some receiver models support only wired
networks. An antenna is only required for wireless
network support. If you need support for a wireless
network, purchase a media receiver with wireless
capability, such as the hp digital media receiver
ew5000.
What version of software do I have?
• From the main home screen, press the options
button and select Preferences. The software
version will be listed.