HP iPAQ hx2000 Additional Information page 106

Establishing a Mobile Phone Partnership
To pair your HP iPAQ with a Bluetooth mobile phone and use the mobile
phone as a wireless modem:
From the Today screen, tap the iPAQ Wireless icon.
1.
Tap the Bluetooth icon to turn Bluetooth on.
2.
3. Tap the Settings button > Accessibility tab.
Check both the Allow other devices to connect checkbox and
4.
the Other devices can discover me checkbox, then tap OK.
5. Turn on the Bluetooth function on your mobile phone. Refer to the
instructions that came with your mobile phone for more
information.
6. Be sure Bluetooth is on, then tap Start > iPAQ Wireless >
Bluetooth Manager > New > Partner with a cell phone
> Next.
7. Select your mobile phone from the Phone selection list (or select
Unknown, or phone not listed if your phone is not on the
list), then tap Next.
8. Enable Bluetooth on your mobile phone and pair the devices. Be
sure your phone is in "discoverable" and "pairable" mode. Refer
to the documentation that came with your mobile phone for more
information. Once your mobile phone is ready, tap Next on your
HP iPAQ.
Tap the Device box to select a mobile phone.
9.
10. When the phone appears in the Bluetooth Browser, select it, then
enter a passkey. Refer to the mobile phone manufacturer's
instructions to see if a default passkey has already been assigned.
If you do not already have a passkey, you can enter your own.
11. When prompted, enter the same passkey in the mobile phone.
12. Enter a name for the connection. Obtain your country code, area
code, and phone number from your mobile phone service
provider. Enter the information in the appropriate boxes, then tap
Finish.
Continued
104