MikroTik CCR2004-1G-12S+2XS Manual

CCR2004-1G-12S+2XS
Cloud Core Router 2004-1G-12S+2XS
The CCR2004 is a high-performance multicore router with twelve 10G SFP+ ports and two 25G SFP28 ports.

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully before beginning installation. Failure to use the
correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity or hot environments.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your
own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik devices must be professionally installed.

Quick start

Connect with your computer to the device using Ethernet cable;
Download the configuration tool
Open the Neighbors tab and connect to the device using MAC address;
The user name: admin
To update the device to the latest software version ownload the latest RouterOS software from
Choose ARM64 packages, and save them to your computer;
Return to the WinBox and upload downloaded packages to the Files menu;
Restart the device.
Detailed info on how to upgrade the device
Set a strong password.

Powering

The device has dual integrated power supply units AC 110-240V (5 A) with standard IEC compatible sockets with Maximum power consumption of 32 W,
with attachments 49 W.

Configuration

The Ethernet port 1 has a default IP address for connecting: 192.168.88.1. The username is admin and there is no password. The device doesn't have any
other configuration applied by default, please set up WAN IP addresses, user password, and update the device. RouterOS includes many configuration
options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities:
the IP connection is not available, the Winbox tool (
For recovery purposes, it is possible to boot the device for reinstallation, see a section
https://mt.lv/winbox ;
, by the default there is no password;
d
https://mt.lv/upgrade
https://mt.lv/winbox
;
) can be used to connect to the MAC address of the device from the LAN side
Reset button.
https://mikrotik.com/download
https://mt.lv/help
;
. In case