MikroTik CCR2004-16G-2S+PC User Manual

CCR2004-16G-2S+PC
CCR2004-16G-2S+PC
Safety Warnings
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for
preventing accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making
sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify
the device.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate
at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take
adequate measures
Electric shock hazard. This equipment is to be serviced by trained personnel only
Quick start
Connect with your computer to the device;
Download the configuration tool
Open the Neighbors tab and connect to the device using the MAC address,
The user name: admin
To update the device to the latest software version ownload the latest RouterOS software from
Choose ARM64 packages, and save them to your computer;
Return to the WinBox and upload downloaded packages;
Restart the device.
Powering
The device has dual integrated power supply units AC 100-240V with standard IEC compatible sockets.
Supported input voltage 36-57 V (DC jack) 36-57 (2-pin terminal)
Power adapter nominal voltage 48 V
Power adapter nominal current 0.9 A
Max power consumption (without attachments) 30 W
Max power consumption 36 W
Configuration
https://mt.lv/winbox ;
, by default there is no password;
d
192.168.88.1 is available on ether15 using a web browser;
https://mikrotik.com/download ;