Moving And Replacing The Power Supply - HP Vectra VL6 7 User Manual

Moving and Replacing the Power Supply

You must move the power supply to access the rear drive shelves and
the additional accessory board slot.
1. Disconnect the power supply
cord and remove the PC's cover.
2. Lift the front of the power supply
then slide it horizontally out. Lift it
clear and lay it upside down on the
front drive unit.
1. Lift the front of the power
supply (the fan end) and slide it
into the rear of the PC.
2. Lower the front of the power
supply so that the catch on
either side slides into place.
Moving the Power Supply
Replacing the Power Supply
2 How to Install Accessories In Your PC
Moving and Replacing the Power Supply
English 25