Table of Contents
Advertisement
en Basic settings
Pull out the detergent drawer.
1.
Open the dispenser cover.
2.
Pour liquid detergent
3.
ric softener
dispensers.
→ "Detergent drawer", Page 18
Do not exceed the marking for the
maximum filling level when filling.
Close the dispenser cover.
4.
Note: To prevent the liquid deter-
gent or fabric softener from drying
out, close the dispenser cover im-
mediately after filling.
If required, add cleaning aids such
5.
as stain remover, water softener or
bleach into the compartment for
manual dosing.
→ "Adding detergent and care
product", Page 31
Push in the detergent drawer.
6.
Adjust the basic dosage
7.
→ Page 34.
34
and fab-
into the relevant
15.3 Basic dosage
The basic dosage depends on the
manufacturer's instructions for the de-
tergent, the water hardness and the
degree of soiling of the laundry.
Always set a basic dosage that cor-
responds to the dosage for a stand-
ard load of 4.5 kg.
Adjusting the basic dosage
Press and hold
1.
prox. 3 seconds.
a The display shows the basic
dosage set for
To adjust the basic dosage for
2.
press
i-Dos.
To adjust the setting, press
3.
min..
To end the setting process, wait
4.
briefly.
16 Basic settings
You can configure the basic settings
for your appliance to meet your
needs.
Note: You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on www.siemens-
home.bsh-group.com .
17 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Note: You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on www.siemens-
home.bsh-group.com .
i-Dos for ap-
.
ter-
,
Advertisement
Table of Contents
