Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vivo STAND-V002D
Summary of Contents for Vivo STAND-V002D
- Page 1 Pneumatic Arm Dual Monitor Desk Mount Instruction Manual SKU: STAND-V002D Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v002d help@vivo-us.com www.vivo-us.com 309-278-5303...
- Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
- Page 3 ASSEMBLY STEPS STEP 1 OPTION A: Clamp Installation Install the clamp base support (B) onto the base of the monitor stand (A) with bolts (H) using provided 4mm Allen wrench (J). Secure clamp (C) to upper two holes with bolts (H) using 4mm Allen wrench (J) for desk with a thickness of 10-55mm.
- Page 4 STEP 1 (Continued) OPTION B: Grommet Base Installation Slide the long bolt (E) through the top of the grommet base support (F) and install on base of monitor stand with bolts (H) using 4mm Allen wrench (J). Position stand on desk with long screw through hole, and secure by using the support plate (I) and clamp knob (G) on underside of the mounting surface.
- Page 5 STEP 3 Adjust gas spring tension by turning screw with 5mm Allen wrench (K). Clockwise reduces tension, counter-clockwise increases tension. The tension should be just enough to hold your monitor in place without lifting itself up. If needed, adjust the bolt on the side of the hinge behind the VESA plate to tighten or loosen the tilt angle support.
- Page 6 STEP 4 Remove cables covers as shown from upper and lower arms.
- Page 7 STEP 5 Replace covers making sure the cables have enough slack to allow for free movement of the arms. Adjust as Desired 180° +90° 360° -90° 360° 360°...
- Page 8 - 83% within < 2hr - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V002D and is the answer not in the manual?
Questions and answers