Table of Contents
Advertisement
12.3
Optical Port Indicators
13
System Commissioning
The SmartLogger can commission devices by connecting to the SUN2000 app, embedded WebUI, and
NMS. This document uses the SUN2000 app as an example to describe major commissioning operations.
Login Mode
User Name
Common user
SUN2000 app
Advanced user
Special user
Common user
a
Web UI
Advanced user
Special user
Note a: If the SmartLogger connects to the WebUI, enter https://XX.XX.XX.XX (XX.XX.XX.XX is the
SmartLogger IP address and is 192.168.0.10 by default) in the address bar of the browser. The
SmartLogger IP address can be queried through the SUN2000 app. For details, see section 13.1
"Connecting the SUN2000 App."
Use the initial password upon first power-on and change it immediately after login. To ensure account
security, change the password periodically and keep the new password in mind. Not changing the initial
password may cause password disclosure. A password left unchanged for a long period of time may be
stolen or cracked. If a password is lost, devices cannot be accessed. In these cases, the user is liable for
any loss caused to the PV plant.
13.1
Connecting the SUN2000 App
NOTE
1. The SUN2000 app is a convenient maintenance platform that communicates with the monitoring
system for you to query alarms, configure parameters, and perform routine maintenance. The app
name is displayed as SUN2000.
2. Mobile phone operating system: Android 4.0 or later, or iOS 7.0 or later.
3. To download the SUN2000 app software package available for Android, access Huawei app store
(http://appstore.huawei.com) or Google Play (https://play.google.com), and search for SUN2000.
4. To download the SUN2000 app software package available for iOS, access App Store and
searches for SUN2000.
5. The Android-oriented app connects to the monitoring system over Bluetooth or USB data cable.
The iOS-oriented app connects to the monitoring system over Bluetooth. The app connects to the
SmartLogger only over Bluetooth.
6. This document uses the WebUIs of Android-oriented SUN2000 app V200R001C00SPC020 as an
example.
Indicator
Status
Green and yellow off
(1) Upper
Green steady on and
optical port
yellow blinking quickly
(0.1s on and 0.1s off)
Green steady on and
(2) Lower
yellow blinking
optical port
intermittently
Green steady on and
yellow blinking slowly
(0.1s on and 1.9s off)
Initial Password
00000a
Changeme
18
Meaning
No optical module is inserted
into the Ethernet optical port.
The fiber link is being set up.
The data is being transmitted.
The fiber link is normal.
Advertisement
Table of Contents
