Recording Vhs Video Files Direct To Dvd; Converting Recorded Tv To Mpeg-2 Format (Europe Only) - HP Compaq Presario,Presario SA4000 Getting Started Manual

64
Getting Started Guide
6 Choose one from each of the following sections (order of selections may differ):
Format Select one of the formats to record your project.
TV System Select between NTSC and PAL for your TV system. The NTSC
format is used in North America, and the PAL format is used in
European and Asian countries/regions.
Volume Enter a Volume name for your disc (optional).
Name of
Disc
Select Device Select the device that contains the blank recordable DVD or CD.
Burning Select the speed to use when recording your project.
Speed
Burn to Disc Select where you would like the file to be recorded:
•
•
7 Click Start.
8 Click OK.

Recording VHS Video Files Direct to DVD

To record VHS video files direct to DVDs:
1 Connect your VCR or other analog video source to your capture card.
2 Click Start, choose All Programs, Video, InterVideo WinDVD
Creator, and then click InterVideo WinDVD Creator again.
3 Select the Record video tape into DVD disc in one step button.
4 Insert a blank DVD into your drive.
5 Click the Capture button and select your VCR.
6 Press the Playback button on your VCR.
7 Click the Record button when the preview window displays what you want to
record.
Converting Recorded TV to MPEG-2
Format (Europe only)
1 If your project is already open, click the Edit button and skip to step 4.
2 Click Start, choose All Programs, Video, InterVideo WinDVD
Creator, and then click InterVideo WinDVD Creator again.
3 Open a project by either selecting the Create new project or Open
existing project button.
4 Click the Output to File (or Save Movie) icon.
5 Select a GQ, HQ, SP, LP or EP format and click OK.
6 Enter a file name and click Save.
Burn to Disc: Use this to burn directly to a DVD or CD.
Write content to hard disk for later burning: Use this
to create the file on your hard disk.