Table of Contents
Advertisement
F.
TO REMOVE GRILL REGULATOR
1.
Isolate from electric supply.
2.
Proceed as 'TO REMOVE FACIA CASTINGS'.
3.
Remove two screws securing control to control mounting panel.
4.
Withdraw control and cables taking care not to strain the cables.
5.
Disconnect cables from the control.
NOTE: Take care to identify terminations.
6.
Re-assemble in reverse order.
G.
TO REMOVE OVEN THERMOSTATS
1.
Isolate from electric supply.
2.
Proceed as 'TO REMOVE GRILL REGULATOR'.
3.
Remove (7) back panel screws.
4.
Remove thermostat phial and capillary through back of cooker, note correct capillary route.
5.
Re-assemble in reverse order.
H.
TO REMOVE SPARK GENERATOR
1.
Isolate from electric supply.
2.
Proceed as 'TO REMOVE HOTPLATE CASTING'. Remove right hand casting only.
3.
Slacken electric panel fixing screws (2). (See Fig. 29).
4.
Lift panel off screws via keyhole slots.
5.
Lift panel clear of appliance.
6.
Disconnect electric cables to generator.
7.
Disconnect electrode cables.
8.
Slacken two screws securing generator to electrics panel to cooker frame and carefully
withdraw generator.
9.
Re-assemble in reverse order.
Fig. 29
54
DESN 513311 A
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 6-4 Series and is the answer not in the manual?
Questions and answers