Measuring Time Between Two P O I N T - Kenwood CS-5200 Series Instruction Manual

Example : I n t h e c a s e o f F i g u r e 15, t h e h o r i z o n t a l d i s t a n c e between t h e two p o i n t s i s
5.4 d i v .
SWEEP TIME/DIV s e t t i n g i s 0.2 ms/div.
Time between two p o i n t s = 5. 4 ( d i v ) x O . 2 ( m s / d i v ) = 1. 08 (ms)
I f the x 1 0 MAG f u n c t i o n i s used:
Time between two p o i n t s - 5.4 ( d i v ) x O . 2 ( m s / d i v ) x 1/10
• Cursor measurement
(1) D i s p l a y the waveform to be measured i n an e a s y - t o - s e e p o s i t i o n .
(2) P r e s s the CURSOR MODE s w i t c h to s e l e c t the time and frequency mode.
and A c u r s o r s i n c o n t a c t w i t h the p o i n t s to be measured.
Figure 15-2
A d j u s t t o t h e vertical
s c a l e w i t h •
Horizontal distance
between 2 signals
F i g u r e 15-1 Measuring Time Between Two P o i n t s
The time between t h e two p o i n t s
= 0.108 (ms) = 108 0 * s )
[CS-5230, 5260, 5270]
Measured value
REF cursor
Measuring Time between Two Points (Cursor measurement)
P O S I T I O N
Adjust to horizontal
center line w i t h
t POSITION
i s found a s f o l l o w s , p r o v i d e d t h e
cursor
B r i n g t h e A R E F
Read the measurement.
41